Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 14-inch 72-tooth Steel Demon Cermet II saw blade for medium metal cutting applications.
Diablo

Diablo 14" x 72-Teeth Steel Demon Cermet II Saw Blade for Medium Metal

$183.03 - $183.03
$183.03
$183.03 - $183.03
$183.03
Availability:
In Stock
SKU D1472CF

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D1472CF 14-inch, 72-tooth circular saw blade is designed for cutting medium-thickness metal and stainless steel with a compatible low-RPM metal-cutting saw. Its Cermet II ceramic-metallic teeth provide high heat tolerance and wear resistance, while the Triple Chip Grind (TCG) tooth design supports clean, precise cuts with fewer burrs and sparks. The thin kerf helps reduce cutting resistance and heat buildup, and laser-cut stabilizer vents help control vibration for straighter cuts. A Perma-SHIELD coating helps protect against heat, gumming and corrosion. The Diablo D1472CF blade is suitable for specified steel profiles, conduit, plate, bar stock and threaded rod when used within the manufacturer's material and thickness guidelines.



  • Cermet II Cutting Teeth

    The ceramic-metallic Cermet II tooth material provides high heat tolerance and hardness for wear resistance during metal-cutting applications.




  • 72-Tooth TCG Design

    The 72-tooth Triple Chip Grind configuration supports controlled cutting and helps produce clean edges with fewer burrs.




  • Designed for Steel and Stainless Steel

    The blade is designed for specified steel and stainless steel applications, including compatible tubing, studs, plate, bar and threaded rod.




  • Multiple Steel Thickness Applications

    The blade supports specified thickness ranges across steel tubing and studs, plate and bar, and threaded rod applications.




  • Reduced Burrs and Sparks

    The controlled TCG cutting action supports cleaner cuts with fewer burrs and sparks than abrasive cutting approaches.




  • 0.083-Inch Thin Kerf

    The 0.083-inch kerf provides a narrow cutting profile that helps reduce cutting resistance and heat buildup during suitable operations.




  • Vibration-Reducing Stabilizer Vents

    Laser-cut stabilizer vents help control vibration and noise, supporting stable blade operation and accurate cuts.




  • Perma-SHIELD Protective Coating

    The non-stick coating helps resist heat buildup, gumming and corrosion for consistent blade performance.




  • Low-RPM Saw Compatibility

    The blade is designed for use with compatible low-RPM metal-cutting saws and has a maximum rated speed of 1,800 RPM.




  • 1-Inch Arbor

    The 1-inch arbor provides a key compatibility specification when matching the blade to a suitable metal-cutting saw.






  • Brand:
    Diablo

  • Model / MPN / SKU:
    D1472CF

  • Product Type:
    Steel Demon Cermet II circular saw blade

  • Blade Diameter:
    14 inches

  • Number of Teeth:
    72

  • Tooth Geometry:
    Triple Chip Grind (TCG)

  • Cutting Edge Material:
    Cermet II ceramic-metallic

  • Arbor Size:
    1 inch

  • Kerf / Cut Width:
    0.083 inch

  • Plate Thickness:
    0.071 inch

  • Hook Angle:
    0 degrees

  • Maximum RPM:
    1,800 RPM

  • Primary Application:
    Medium metal and stainless steel cutting

  • Suitable Materials:
    Specified steel, stainless steel and other approved metal stock

  • Coating:
    Perma-SHIELD non-stick coating

  • Stabilization Feature:
    Laser-cut stabilizer vents

  • Recommended Tool:
    Dedicated low-RPM metal-cutting saw



Frequently Asked Questions

The Diablo D1472CF is a 14-inch, 72-tooth metal-cutting blade designed for use with a dedicated low-RPM metal-cutting saw. It is intended for steel and stainless steel applications, including steel tubing within its specified wall-thickness range.

The Diablo D1472CF Steel Demon blade is designed for medium steel and stainless steel cutting applications. It uses Steel Demon Cermet II teeth and a TCG configuration for controlled cutting of these metal materials.

The D1472CF uses a 72-tooth TCG design and a Cermet II cutting system intended to provide a controlled cutting action in steel and stainless steel. Its cold-cutting approach is designed to produce fewer sparks than abrasive cutting methods, although actual results depend on the material, saw, setup and cutting technique.

The Diablo D1472CF is a 14-inch metal-cutting blade with a 1-inch arbor and Steel Demon Cermet II teeth. It is designed for steel and stainless steel applications and requires a compatible dedicated low-RPM metal-cutting saw.

The D1472CF is specified for threaded rod in the 1/2 to 2-inch diameter range, so 1/2-inch threaded rod falls within its stated application range. Use it only with a compatible low-RPM metal-cutting saw and follow the blade and saw manufacturer's operating guidance.

Use a blade specifically designed for steel and make sure the saw operates within the blade's required speed range. The D1472CF combines TCG geometry with Steel Demon Cermet II teeth for controlled metal cutting, while secure workpiece clamping and correct setup also contribute to cut quality.

Spark production can vary with the cutting method, blade type, material and operating conditions. The D1472CF uses a cold-cut approach with Cermet II teeth and is designed to produce fewer sparks than abrasive cutting discs, although it still requires the correct dedicated low-RPM saw and setup.

Securely clamp the workpiece and make sure the blade is correctly installed on a compatible saw before cutting. The D1472CF features laser-cut stabilizer vents and a laser-cut arbor designed to support blade stability during cutting.

The Diablo D1472CF is a 14-inch, 72-tooth Steel Demon metal-cutting blade designed for steel and stainless steel applications. Check the current PowerBolt & Tool listing for the latest price and availability, as stock and pricing can change.

The D1472CF is designed for medium steel applications and combines 72T TCG geometry with Steel Demon Cermet II teeth. It has a 1-inch arbor and a maximum speed of 1,800 RPM, so it must be used with a compatible dedicated low-RPM metal-cutting saw.

A Cermet blade such as the D1472CF uses engineered cutting teeth to make controlled cuts through steel and stainless steel, rather than relying on an abrasive disc to remove material. The D1472CF's cold-cut approach is designed to produce fewer sparks and can offer a different cutting experience from abrasive discs, but the best option depends on the material, equipment and application.

Check the blade diameter, tooth configuration, material compatibility, arbor size, kerf and required saw speed before choosing a metal-cutting blade. The D1472CF has a 14-inch diameter, 72T TCG design, Cermet II teeth, a 1-inch arbor and a 1,800 RPM maximum, and requires a dedicated low-RPM metal-cutting saw.

The Diablo D1472CF matches these specifications, with a 14-inch diameter, 72 TCG teeth and a 1-inch arbor. It is designed for steel and stainless steel cutting and uses Steel Demon Cermet II tooth technology.

The D1472CF has a maximum speed of 1,800 RPM. This low speed is a critical compatibility requirement, so the blade should be used only with a dedicated low-RPM metal-cutting saw that is rated for the blade.

The D1472CF is specified for steel tubing with a 1/8 to 1/2-inch wall thickness, plate and bar from 1/4 to 1 inch, and threaded rod from 1/2 to 2 inches in diameter. Confirm the actual material dimensions and profile before cutting to ensure they fall within the blade's intended application ranges.