Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 7-1/4-inch 56-tooth saw blade for cutting thick aluminium.
Diablo

Diablo 7-1/4" x 56-T Thick Aluminum Cutting Saw Blade

$69.03 - $69.03
$69.03
$69.03 - $69.03
$69.03
Availability:
In Stock
SKU D0756NA

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D0756NA 7-1/4-inch, 56-tooth thick aluminum cutting saw blade is designed for cutting thick aluminum and compatible non-ferrous metals using a suitable corded or cordless circular saw. Its TiCo Super-Density Micro-Grain Carbide teeth provide wear resistance and support extended cutting life, while the Triple Chip Grind (TCG) tooth geometry helps deliver clean, low-burr cuts. The 0.106-inch kerf is designed for controlled material removal, and tri-metal shock-resistant brazing helps secure the carbide teeth against impact. Laser-cut stabilizer vents help reduce vibration and noise, while the Perma-SHIELD non-stick coating helps resist heat, gumming and corrosion. The Diablo D0756NA 56-tooth aluminum cutting blade is suitable for compatible aluminum extrusions, copper pipe, brass plate and other approved non-ferrous materials within the recommended thickness range.


  • Designed for Thick Aluminium Cutting

    The D0756NA is intended for compatible thick aluminium stock, including material approximately 3/16 to 7/16 inch thick, when used with an approved saw and the correct cutting setup.



  • TiCo Super-Density Micro-Grain Carbide Teeth

    The specialised carbide teeth support wear resistance and cutting performance during demanding non-ferrous metal applications.



  • 56-Tooth Triple Chip Grind Design

    The 56-tooth TCG geometry is designed to support controlled, low-burr cuts in compatible aluminium and other approved non-ferrous materials.



  • Clean Cuts in Aluminium Extrusions

    The blade's non-ferrous cutting design makes it relevant for aluminium extrusions and compatible stock where a cleaner edge can help reduce finishing work.



  • Suitable for Approved Non-Ferrous Metals

    The blade is intended for compatible non-ferrous cutting applications. Check the manufacturer's material list before using it on brass, copper or any material beyond the explicitly approved applications.



  • Tri-Metal Shock-Resistant Brazing

    The reinforced tooth attachment helps secure the carbide tips against cutting impacts, supporting durability during regular use within the blade's intended applications.



  • Laser-Cut Stabilizer Vents

    The stabilizer vents help control vibration and noise, supporting controlled blade operation and accurate cuts when the blade is properly installed and the workpiece is securely supported.



  • Perma-SHIELD Non-Stick Coating

    The protective coating helps reduce friction, heat buildup, gumming and corrosion, supporting consistent cutting performance during suitable applications.



  • 0.106-Inch Kerf and 0.087-Inch Plate

    The listed 0.106-inch kerf and 0.087-inch plate provide useful dimensions for product comparison and setup checks. Confirm these measurements against the current manufacturer specifications before publication.



  • 7-1/4-Inch Blade with 5/8-Inch Arbor

    The blade diameter and arbor details help users assess fit with their circular saw. Check the saw's compatibility and manufacturer requirements before installation. Verify the listed 8,000 RPM maximum against the current product specification before use.





  • Brand:
    Diablo

  • Model / MPN / SKU:
    D0756NA

  • Product Type:
    Thick Aluminum Cutting Circular Saw Blade

  • Blade Diameter:
    7-1/4 inches

  • Number of Teeth:
    56

  • Tooth Geometry:
    Triple Chip Grind (TCG)

  • Cutting Edge Material:
    TiCo Super-Density Micro-Grain Carbide

  • Arbor Size:
    5/8 inch with diamond knockout

  • Kerf / Cut Width:
    0.106 inch

  • Plate Thickness:
    0.087 inch

  • Hook Angle:
    -6 degrees

  • Maximum RPM:
    8,000 RPM

  • Primary Application:
    Thick aluminum cutting

  • Recommended Aluminum Thickness:
    Approximately 3/16 to 7/16 inch

  • Other Suitable Materials:
    Compatible copper, brass and other approved non-ferrous materials

  • Coating:
    Perma-SHIELD non-stick coating

  • Stabilization Feature:
    Laser-cut stabilizer vents

  • Tooth Attachment:
    Tri-metal shock-resistant brazing

  • Recommended Saw Types:
    Compatible corded and cordless circular saws

  • Pack Size:
    1 blade



Frequently Asked Questions

The Diablo D0756NA is a 7-1/4-inch, 56-tooth TCG carbide blade designed for thick aluminium cutting. It is intended for aluminium stock around 3/16 to 7/16 inch thick, helping produce clean, burr-free edges when used with a compatible saw and the correct cutting setup.

The Diablo D0756NA uses 56-tooth Triple Chip Grind (TCG) geometry designed to produce clean, burr-free cuts in aluminium. Its TiCo Super-Density Micro-Grain Carbide teeth are also designed to resist wear and reduce clogging, which can help limit cleanup and rework after cutting.

The Diablo D0756NA is designed for non-ferrous metal cutting, including aluminium, brass and copper. Its 56-tooth TCG carbide design supports clean cuts in suitable stock, but confirm the material dimensions and the blade's application guidance before use.

The Diablo D0756NA matches these specifications, with a 7-1/4-inch diameter, 56 TCG teeth and a 5/8-inch arbor with a diamond knockout. It is designed for thick aluminium cutting and has a 0.106-inch kerf.

The Diablo D0756NA is designed for non-ferrous metal cutting and is listed for compatible corded and cordless circular saws. Its 56-tooth TCG design and 0.106-inch kerf support controlled cutting, but check the saw's blade diameter, arbor configuration, speed rating and manufacturer instructions before use.

Use a blade designed for aluminium rather than a general-purpose wood blade, such as the Diablo D0756NA with its 56-tooth TCG geometry. The tooth design is intended to produce clean, burr-free cuts, while secure clamping, steady feeding and suitable workpiece support can help reduce rework.

Aluminium can accumulate on cutting teeth when heat, friction or an unsuitable blade design causes material to stick to the cutting edges. The Diablo D0756NA uses TiCo Super-Density Micro-Grain Carbide teeth designed for clog-resistant cutting, while its Perma-SHIELD coating helps protect against heat build-up and gumming.

The Diablo D0756NA is designed for non-ferrous metal applications such as aluminium extrusions, with 56 TCG teeth intended to produce clean, burr-free edges. Secure the extrusion properly, follow the saw manufacturer's cutting instructions and confirm that the blade is suitable for the profile's thickness to help minimise finishing work.

The Diablo D0756NA is a 7-1/4-inch, 56-tooth TCG carbide blade specifically designed for thick aluminium applications. Its intended thick-aluminium range is approximately 3/16 to 7/16 inch, so check the stock dimensions and your saw's compatibility before selecting it.

The Diablo D0756NA is designed for non-ferrous cutting, including aluminium extrusions, and uses a 56-tooth TCG profile for clean, burr-free results. Its carbide teeth and Perma-SHIELD coating are designed to support durability and reduce clogging, but the blade must still match the extrusion dimensions and saw requirements.

A thick-aluminium blade such as the Diablo D0756NA uses TCG tooth geometry and carbide designed for non-ferrous metals, with a focus on controlled cutting and burr reduction. A standard wood-cutting blade is designed for timber and wood-based materials, so its tooth design and cutting characteristics make it an unsuitable substitute for dedicated aluminium cutting.

Choose a blade based on the thickness category specified by the manufacturer, because thin, medium and thick aluminium blades are designed for different stock ranges. Diablo's categories include thin aluminium up to 1/8 inch, medium aluminium from 3/32 to 1/4 inch and thick aluminium from 3/16 to 7/16 inch; the D0756NA is intended for the thick category.

The Diablo D0756NA is designed for thick aluminium and is also suitable for non-ferrous materials such as brass and copper. Its 7-1/4-inch diameter, 56 TCG teeth and carbide construction support clean cutting, but verify the thickness and application guidance for the particular material.

The Diablo D0756NA has a 5/8-inch arbor with a diamond knockout and a 0.106-inch kerf. Confirm that your saw accepts the arbor configuration and blade diameter before installation, and follow the tool manufacturer's mounting instructions.

The listed maximum speed for the Diablo D0756NA is 8,000 RPM. Do not exceed the blade's rated speed, and confirm that your circular saw's operating speed and mounting requirements are compatible before use.