Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
DeWalt 6-1/2-inch 36-tooth aluminium circular saw blade for cutting aluminium and non-ferrous metals.
DeWalt

DeWalt 6-1/2" Metal Cutting 36-T Aluminum Circular Saw Blade

$50.75 - $50.75
$50.75
$50.75 - $50.75
$50.75
Availability:
In Stock
SKU DW9152

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The DeWalt DW9152 6-1/2" 36T aluminum cutting blade is designed for cutting aluminum and other non-ferrous metals, including brass and copper, when used with a compatible circular saw. Its heavy-gauge, laser-cut steel plate is hardened, tempered and precision-balanced to support accurate cutting. The carbide-tipped teeth help maintain sharp cutting edges, while the ultra-thin kerf supports fast cutting. Laser-cut expansion slots help reduce noise and edge vibration, contributing to a cleaner finish with fewer burrs. For professionals and workshop users seeking DeWalt DW9152 specs, this blade combines a 6-1/2-inch diameter with 36 teeth for non-ferrous metal cutting applications.



  • Designed for Aluminium Cutting

    Suitable for cutting aluminium and other non-ferrous metals, including brass and copper, with compatible equipment.




  • Carbide-Tipped Teeth

    The extra-hard carbide cutting edges help maintain sharpness and support extended blade life when cutting suitable non-ferrous metals.




  • 36-Tooth Configuration

    The 36-tooth design is intended for non-ferrous metal cutting applications. Choose the blade according to the material, saw compatibility and cutting requirements.




  • Precision-Balanced Steel Plate

    The heavy-gauge, laser-cut, hardened and tempered steel plate is designed to support accurate cutting performance.




  • Ultra-Thin 0.059-Inch Kerf

    The thin cutting profile supports efficient material removal and may help reduce the power required for cutting, depending on the saw and material.




  • Reduced Noise and Vibration

    Laser-cut expansion slots help minimise noise and edge vibration, supporting improved cutting control and surface finish.




  • 6-1/2-Inch Diameter and 5/8-Inch Arbor

    The 6-1/2-inch diameter and 5/8-inch arbor help you check fitment when selecting a replacement blade. Confirm that both dimensions match your saw's requirements.




  • Maximum Speed Rating of 7,000 RPM

    Check the blade's 7,000 RPM maximum against your saw's operating speed before use. Never exceed the blade's rated maximum speed.




  • Laser-Etched, Colour-Coded Identification

    The laser-etched, colour-coded design helps identify the blade's intended cutting material.






  • Brand:
    DeWalt

  • Model / MPN / SKU:
    DW9152

  • Product Type:
    Aluminum Cutting Circular Saw Blade

  • Blade Diameter:
    6-1/2 inches

  • Number of Teeth:
    36

  • Arbor Size:
    5/8 inch

  • Arbor Shape:
    Round

  • Blade Material:
    Carbide-tipped

  • Cutting Materials:
    Aluminum and non-ferrous metals, including brass and copper

  • Maximum Blade Speed:
    7,000 RPM

  • Maximum Cutting Depth:
    2-3/16 inches

  • Kerf / Cut Width:
    Approximately 0.059 inch

  • Plate Thickness:
    Approximately 0.039 inch

  • Tooth Grind:
    Flat Top (FTG)

  • Tooth Angle:
    Approximately 3 degrees

  • Package Contents:
    1 saw blade

  • Application:
    Solid-stock metal cutting



Frequently Asked Questions

The DeWalt DW9152 is a 6-1/2-inch circular saw blade designed for cutting aluminium and other non-ferrous metals. It has a standard 5/8-inch round arbor and 36 carbide-tipped teeth, but you should check your saw's manual to confirm compatibility before fitting it.

The DeWalt DW9152 has 36 carbide-tipped teeth and is designed for cutting aluminium, brass, copper and other non-ferrous metals. Its heavy-duty tungsten carbide tips are designed to maintain a sharp cutting edge for long life.

The DeWalt DW9152 has a 0.059-inch kerf and an anti-stick rim designed to reduce friction and material build-up. Its thin kerf is intended to support fast cutting, although actual performance depends on the saw, workpiece and cutting conditions.

The DeWalt DW9152 features laser-cut expansion slots designed to minimise noise and edge vibration. The manufacturer also associates this design with an improved surface finish and fewer burrs, although correct blade installation, workpiece support and saw condition remain important.

The DeWalt DW9152 has a listed maximum cutting depth of 2-3/16 inches and is designed for aluminium and other non-ferrous metals. The actual cutting depth you can achieve depends on your saw, its setup and the dimensions and position of the workpiece.

The DeWalt DW9152 has laser-cut expansion slots designed to minimise edge vibration and support a surface finish with fewer burrs. Use a compatible saw, secure the workpiece properly and follow the manufacturer's cutting guidance, as the finished edge also depends on the material and operating conditions.

Blade vibration can have several causes, including incorrect installation, a damaged blade, poor workpiece support or a compatibility issue. The DeWalt DW9152 has a precision-balanced steel plate and laser-cut expansion slots designed to support accurate cuts and minimise edge vibration, but these features cannot correct every underlying problem.

The DeWalt DW9152 has an anti-stick rim designed to reduce friction and material build-up on the blade. Its thin 0.059-inch kerf is also intended to support fast cutting, but results depend on the workpiece, saw setup and cutting technique.

The DeWalt DW9152 is designed for cutting aluminium and other non-ferrous metals, including brass and copper. It has a 6-1/2-inch diameter, 36 carbide-tipped teeth and a 5/8-inch round arbor, so confirm that these specifications match your saw before use.

The DeWalt DW9152 is classified for metal cutting in solid stock and is designed for aluminium and other non-ferrous metals. Its 36 carbide-tipped teeth and thin kerf support its intended metal-cutting application, but always follow the saw and blade manufacturers' guidance for the specific stock dimensions and cutting setup.

Check the blade diameter, arbor size and shape, tooth design, kerf, plate thickness, intended workpiece material and maximum rated speed. The DeWalt DW9152 measures 6-1/2 inches in diameter, has a 5/8-inch round arbor, a 0.059-inch kerf, a 0.039-inch plate thickness and a maximum speed of 7,000 RPM; your saw must be compatible with all relevant specifications.

A thin-kerf blade such as the DeWalt DW9152 has a 0.059-inch kerf and is designed to support fast cutting, with the potential to help reduce the power needed for each cut. Whether it improves performance or battery use depends on the saw, aluminium stock and cutting conditions, so confirm that the blade is approved for your tool.

Yes, the DeWalt DW9152 is designed for aluminium and other non-ferrous metals, including brass and copper. It has 36 carbide-tipped teeth and a 5/8-inch round arbor, but check your saw's compatibility and follow the manufacturer's guidance for the material you plan to cut.

The DeWalt DW9152 has a 5/8-inch round arbor and a maximum rated speed of 7,000 RPM. Do not exceed the blade's rated speed, and make sure the saw's arbor and operating specifications are compatible with the blade.

The DeWalt DW9152 is supplied as one blade, and its kerf measures 0.059 inch. The kerf is the width of the cut, while the steel plate thickness is 0.039 inch, so these are two different measurements.