DeWalt 7" x 7/8" Type-1 Aluminum Oxide Grinding Wheel - 25 Qty

The DeWalt DW8065 is a 7-inch Type 1 aluminum oxide abrasive wheel designed for aggressive metal cutting. The listing identifies it as a DeWalt DW8065 7 x 0.045 x 7/8 Type 1 high-performance thin cut wheel with a 7/8-inch unthreaded arbor, 60-grit medium abrasive grade and resin bond. The high-performance aluminum oxide grain is designed for long life and high material removal, while the high grain concentration supports aggressive cutting action and smoother running wheels. Thicker fiberglass reinforcement is designed to withstand extreme applications, and the wheel is rated for a maximum operating speed of 8,700 RPM. It is specified for carbon steel, stainless steel and nickel-based alloys, and the Power Bolt and Tool listing includes 25 wheels per order.

• Aluminum Oxide Abrasive:
  

  The high-performance aluminum oxide grain is designed for long wheel life and high material removal during metal cutting.

  
  



• 60-Grit Medium Abrasive Grade:
  

  The 60-grit, medium-grade abrasive is designed for aggressive cutting, with a coarser grit that generally supports faster material removal than a finer abrasive.

  
  



• High Material Removal:
  

  The aluminum oxide grain is designed for high material removal, supporting demanding metal cutting work where speed through the material matters.

  
  



• High Grain Concentration:
  

  The high grain concentration is designed to provide aggressive cutting action by placing more abrasive grain across the wheel.

  
  



• Smoother Running Wheels:
  

  The wheel is designed to run smoother while maintaining aggressive cutting action, which suits users who want cutting speed without giving up smooth running.

  
  



• Extended Wheel Life:
  

  The product information states up to 50% longer life from Temper Point grains under the stated comparison conditions, giving users a longer-wearing option when abrasive wheels wear out quickly.

  
  



• Reinforced Fiberglass Construction:
  

  Thicker fiberglass, listed as two sheets of fiberglass, is designed to withstand extreme applications and add strength for demanding metal cutting.

  
  



• Type 1 Wheel Design:
  

  The Type 1 configuration is a straight, flat wheel profile designed for metal cutting applications.

  
  



• 7-Inch Diameter:
  

  The 7-inch diameter provides a larger wheel size for metalworking, fabrication and cutting tasks on compatible equipment.

  
  



• 7/8-Inch Unthreaded Arbor:
  

  The 7/8-inch unthreaded arbor hole is designed for use with compatible grinders and mounting equipment that accept a 7/8-inch arbor.

  
  



• Resin Bond:
  

  The resin bond holds the aluminum oxide grain in the wheel and is part of the construction designed for aggressive cutting.

  
  



• Carbon Steel, Stainless Steel and Nickel-Based Alloys:
  

  The DW8065 is specified for metal cutting applications involving carbon steel, stainless steel and nickel-based alloys.

  
  



• 8,700 RPM Maximum Operating Speed:
  

  The wheel is rated for a maximum operating speed of 8,700 RPM, so the grinder used should not exceed this rating.

  
  



• 25-Piece Pack:
  

  The product is supplied as a 25-quantity pack, suited to workshops and jobsites that use cutting wheels repeatedly.