Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
DeWalt 7-1/4-inch 24-tooth cordless mitre saw blade for fast, efficient wood cutting.
DeWalt

DeWalt 7-1/4" 24-Tooth Cordless Miter Saw Blade

$21.69 - $21.69
$21.69
$21.69 - $21.69
$21.69
Availability:
In Stock
SKU DW7112PT

Package Quantity: 1

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The DeWalt DW7112PT 7-1/4" miter saw blade is a general-purpose cutting blade designed for compatible cordless miter saws. Its 24 carbide-tipped teeth support fast, precise cuts in suitable wood materials, making it useful for trim work, mouldings and pre-fabrication. Optimised tooth geometry helps produce straight cuts, while face-ground teeth are designed to minimise splintering and improve surface finish. The precision-engineered blade plate and body slots help reduce vibration, while the ToughCoat anti-stick coating helps reduce friction and material build-up. Its thin-kerf design supports smooth cutting with less material removed. The DeWalt DW7112PT cordless miter saw blade is a practical option for general woodworking and installation tasks when used with compatible equipment.



  • 24 Carbide-Tipped Teeth

    The 24-tooth configuration supports efficient general-purpose cutting and durability across compatible wood applications.




  • General-Purpose Wood Cutting

    The blade is designed for general-purpose woodworking tasks where efficient cutting performance is required.




  • Optimised Tooth Geometry

    The optimised tooth design helps produce straight, precise cuts in compatible wood materials.




  • Face-Ground Teeth

    Face-ground teeth help minimise splintering and support cleaner cutting results on suitable wood materials.




  • Reduced Tear-Out and Splintering

    The tooth design supports reduced tear-out and splintering for cleaner crosscutting results.




  • Vibration-Reducing Body Slots

    Designed body slots help reduce vibration, supporting improved cutting control and consistent results.




  • ToughCoat Anti-Stick Coating

    The ToughCoat coating helps reduce friction and material build-up during cutting.




  • Thin-Kerf Cutting Design

    The 0.063-inch kerf provides a narrow cutting profile that removes less material than a wider-kerf blade.




  • Trim and Moulding Applications

    The blade is suitable for trim and moulding applications where general-purpose cutting performance is required.




  • Cordless Miter Saw Compatibility

    The blade is designed for compatible cordless miter saw applications, including the stated DCS361 application.






  • Brand:
    DeWalt

  • Model / MPN / SKU:
    DW7112PT

  • Product Type:
    General-Purpose Cordless Miter Saw Blade

  • Blade Diameter:
    7-1/4 inches

  • Number of Teeth:
    24

  • Arbor Size:
    5/8 inch

  • Tooth Tip Material:
    Carbide

  • Tooth Grind:
    Alternate Top Bevel (ATB)

  • Hook Angle:
    7 degrees

  • Kerf / Cut Width:
    0.063 inch

  • Plate Thickness:
    0.039 inch

  • Maximum Operating Speed:
    7,000 RPM

  • Coating:
    ToughCoat anti-stick coating

  • Intended Material:
    Wood and compatible wood-based materials

  • Applications:
    General-purpose cutting, trim, mouldings and pre-fabrication

  • Recommended Tool:
    Compatible cordless miter saw

  • Package Contents:
    1 saw blade



Frequently Asked Questions

The DeWalt DW7112PT is a 7-1/4-inch, 24-tooth blade designed for general-purpose wood cutting with compatible cordless miter saws. Its carbide teeth and general-purpose configuration make it suitable for a range of everyday wood-cutting tasks.

Yes, the DW7112PT is positioned as a general-purpose 24-tooth blade rather than an ultra-fine finish blade. It can be used for trim and moulding applications when a balance between efficient cutting and finish quality is preferred.

The DW7112PT uses optimised tooth geometry and face-ground teeth to support clean, controlled cuts. Excessive tear-out can also be affected by blade condition, workpiece support, cutting direction and technique, so the blade should be used with the correct setup.

The DeWalt DW7112PT is a 7-1/4-inch, 24-tooth blade with a 5/8-inch arbor and carbide teeth. It is positioned for use with compatible cordless miter saws, including the DeWalt DCS361 listed for this blade.

The DW7112PT is designed as a general-purpose blade for cordless miter saw applications and is suitable for pre-fabrication work where a versatile wood-cutting blade is required. Its 24-tooth configuration prioritises general-purpose cutting rather than the finer finish associated with higher-tooth-count blades.

Start with a suitable blade that is correctly installed and in good condition, then check that the saw is properly aligned and the workpiece is securely supported. The DW7112PT's tooth geometry is designed for controlled cutting, but accurate results also depend on steady tool handling and the correct cutting technique.

Tear-out can result from the blade's condition, tooth configuration, material support or cutting technique rather than tooth count alone. The DW7112PT uses face-ground teeth and optimised geometry to support cleaner cuts, while proper workpiece support and a sharp blade can also help control tear-out.

Make sure the blade is correctly fitted, the saw is properly set up and the workpiece is firmly supported before cutting. The DW7112PT features patented body slots designed to help reduce vibration, but saw alignment, blade condition and cutting technique also affect vibration.

The DeWalt DW7112PT is a 7-1/4-inch, 24-tooth blade intended for general-purpose wood cutting with compatible miter saws. Check the current PowerBolt & Tool listing for the latest price and availability, as these can change.

The DW7112PT is positioned as a general-purpose 7-1/4-inch blade with 24 carbide-tipped teeth for cordless miter saw applications. It is listed for compatibility with the DeWalt DCS361 and is suited to users who want a versatile blade rather than an ultra-fine finish configuration.

A 24-tooth blade is generally better suited to faster, general-purpose wood cutting, while a 60-tooth blade is typically chosen when a finer finish is the priority. The better option depends on whether cutting speed, versatility or finish quality matters most for the particular job.

A 24-tooth blade such as the DW7112PT is generally aimed at general-purpose cutting, while a 40-tooth blade can offer a smoother finish at the expense of some cutting speed. The appropriate tooth count depends on the material, desired finish and whether the job prioritises efficient general cutting or cleaner finishing.

The DeWalt DW7112PT matches these specifications, with a 7-1/4-inch diameter, 24 teeth and a 5/8-inch arbor. It is positioned for compatible cordless miter saw use, including the DCS361 listed for the product.

The DW7112PT has a listed kerf of 0.063 inch. Kerf refers to the width of the cut made by the blade, so it is an important specification when considering material removal, cutting efficiency and compatibility with the intended application.

The DW7112PT is designed for use with compatible cordless miter saws, with the DeWalt DCS361 specifically listed for the blade. Always verify the blade diameter, arbor, speed rating and other requirements against your particular saw before installation.