DeWalt POWER-STUD‚®+ SD1 1/4" x 1-3/4" Wedge Expansion Screw Anchor - 100 Qty

General Applications And Uses

• Structural connections, i.e., beam and column anchorage
• Safety-related attachments
• Interior applications / low level corrosion environment
• Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
• Seismic and wind loading

Features And Benefits

• Consistent performance in high and low strength concrete
• Nominal drill bit size is the same as the anchor diameter
• Anchor can be installed through standard fixture holes
• Length ID code and identifying marking stamped on head of each anchor
• Anchor design allows for follow-up expansion after setting under tensile loading

Approvals And Listings

• International Code Council, Evaluation Service (ICC-ES), ESR-2818 for concrete Code compliant with the 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, 2009 IRC, 2006 IBC and 2006 IRC.
• International Code Council, Evaluation Service (ICC-ES), ESR-2966 for masonry Code compliant with the 2012 IBC, 2012 IRC, 2009 IBC, 2009 IRC, 2006 IBC, and 2006 IRC.
• Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318 (Strength Design method using Appendix D)
• Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)
• Tested in accordance with ICC-ES AC01 for use in Masonry
• Underwriters Laboratories (UL Listed) - File No. EX1289. See listing for sizes

Guide Specifications

• CSI Divisions: 03 16 00 - Concrete Anchors, 04 05 19.16 - Masonry Anchors and 05 05 19 - Post Installed Concrete Anchors. Expansion anchors shall be Power-Stud+ SD1 as supplied by Brewster, NY. Anchors shall be installed in accordance with published instr

Ordering Information

• Thread Version: UNC threaded stud
• Anchor Materials: Zinc plated carbon steel body with expansion clip, nut and washer
• Anchor Size Range (TYP.): 1/4" diameter through 1-1/4" diameter

Suitable Base Materials

• Normal-weight concrete
• Structural sand-lightweight concrete
• Concrete over steel deck
• Grouted concrete masonry (CMU)

Material Specifications

• Anchor Body: Medium carbon steel
• Hex nut: Carbon steel, ASTM A 563, Grade A
• Washer: Carbon Steel, ASTM F 844; meets dimensional requirements of ANSI B18.22.2. Type A Plain
• Expansion wedge (clip): Carbon Steel
• Plating: Zinc plating according to ASTM B 633, SC1 Type III (Fe/Zn 5). Minimum plating requirements for Mild Service Condition.

Product Specifications

• Carton Qty.: 600
• Anchor Size: 1/4" x 1-3/4"
• Wt. /100(lbs.): 3
• Box Qty.: 100

Downloads