Skip to content

HOTLINE - 1-888-514-515

Free Shipping On Orders $75+

100% secure payment

HOTLINE - 1-888-514-515 | Free Shipping On Orders $75+ | 100% secure payment

Wiser

Filters

$
$
  • fb757985-484f-44e5-9775-369f1812a23e.jpeg

    DeWalt ULTRACON‚® 5/16" x 3-3/4" Hex TrimFit Head Screw Anchor - 500 Qty

    Stanley Black and Decker
    $107.00 - $107.00
    $107.00
    $172.59
    $172.59 - $172.59
    $172.59
    In Stock

    Features 5/16" diameter provides increased shear and tensile strength Stalgard® coating provides 1000 hours of salt spray protection when tested in accordance with ASTM B117 Available in various head styles to fit the intended application Installed with a standard ANSI bit Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fastener Type - Masonry & Concrete: Mechanical Anchor Faste...
  • 3b3d6111-a997-4303-8407-4c253498adff.jpeg

    DeWalt SUSPENDER‚® 5/16" x 2-1/4" Dual Direction Rod Hanging Anchor for Concrete - 25 Qty

    Stanley Black and Decker
    $18.11 - $18.11
    $18.11
    $18.11 - $18.11
    $18.11
    In Stock

    Features Ease and speed of overhead installation Lower in-place cost, when compared to beam clamps, lag bolts and dropins Solid, one-piece, cold formed and machined anchor New head style is both end and cross drilled to accept vertical (in-line) and horizontal (side-mount) applications Entire system requires only one driver 3/8" to 1/2" thread adapter allows installation of 1/2-13 threaded rod components Specifications Country of Origin: TWN

  • c39bd59f-708e-43ab-8770-9e91eda23fdd.jpeg

    DeWalt ULTRACON+‚® 3/16" x 4" Phillips Flat Head Screw Anchor - 1000 Qty

    Stanley Black and Decker
    $126.00 - $126.00
    $126.00
    $126.00 - $126.00
    $126.00
    In Stock

    Features Available in several head styles Several colors and finishes to match application Removable (reusable in wood) High-low thread design for greater stability and grip Does not exert expansion forces No hole spotting required Good corrosion protection with Stalgard coating Gimlet point for self drilling into wood base material Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fa...
  • bf6a7ff6-c6f2-4651-981c-28e7f9e2b8f7.jpeg

    DeWalt HANGERMATE‚® 3/16-1/4" x 3-1/4" Ceiling Screw Eyelet Rod Hanging Anchor - 25 Qty

    Stanley Black and Decker
    $14.98 - $14.98
    $14.98
    $14.98 - $14.98
    $14.98
    In Stock

    Features Ease and speed of overhead installation Lower in-place cost, when compared to beam clamps, lag bolts and dropins Steel and wood Hangermate can be installed with a drill screw gun Side mount versions available for steel and wood Hangermate Hangermate socket drivers used for the steel and wood hangers Specifications Country of Origin: TWN

  • DeWalt ULTRACON+‚® 1/4" x 1-1/4" Philips Flat TrimFit Concrete Screw Anchor - 2500 Qty

    Stanley Black and Decker
    $211.96 - $211.96
    $211.96
    $211.96 - $211.96
    $211.96
    In Stock

    The UltraCon+ fastening system is a complete family of screw anchors for light to medium duty applications in concrete, masonry block, brick, and wood base materials. The UltraCon+ is fast and easy to install and provides a neat, finished appearance. The UltraCon+ screw anchor is engineered with matched tolerance drill bits and installation tools designed to meet the needs of the user and also provide optimum performance. The UltraCon+ features a gimlet point for selfdrilling into wood base ...
  • 9888a47b-1c4c-4a52-ab61-521e51406019.jpeg

    DeWalt SUSPENDER‚® 1/4-20" x 1-1/2" 5-Point Dual Direction Rod Hanging Anchor - 25 Qty

    Stanley Black and Decker
    $21.73 - $21.73
    $21.73
    $21.73 - $21.73
    $21.73
    In Stock

    Features Ease and speed of overhead installation Lower in-place cost, when compared to beam clamps, lag bolts and dropins Solid, one-piece, cold formed and machined anchor New head style is both end and cross drilled to accept vertical (in-line) and horizontal (side-mount) applications Entire system requires only one driver 3/8" to 1/2" thread adapter allows installation of 1/2-13 threaded rod components Specifications Country of Origin: TWN

  • 867cdcee-7eeb-422d-be6c-2dc578733dd5.jpeg

    DeWalt SCREW-BOLT+ 3/8" x 6" MG Hex Washer Head Screw Anchor - 50 Qty

    Stanley Black and Decker
    $131.77 - $131.77
    $131.77
    $131.77 - $131.77
    $131.77
    In Stock

    Features Designed for standard ANSI tolerance drill bits Patented thread design offers toughened threads for tapping high strength concrete Low installation torque in concrete and masonry Universal product for concrete and grouted/solid masonry Ratchet teeth on underside of hex washer head lock against the fixture Can be installed closer to a free edge than traditional expansion anchors Fully removable and reinstallable in same hole (see www.DEWALT.com) Fast installation with powered impact...
  • 63a7e30f-2be2-4e42-af4e-05c911584ee4.jpeg

    DeWalt SCREW-BOLT+ 1/2" x 5" MG Hex Washer Head Screw Anchor - 25 Qty

    Stanley Black and Decker
    $49.61 - $49.61
    $49.61
    $49.61 - $49.61
    $49.61
    In Stock

    Features Designed for standard ANSI tolerance drill bits Patented thread design offers toughened threads for tapping high strength concrete Low installation torque in concrete and masonry Universal product for concrete and grouted/solid masonry Ratchet teeth on underside of hex washer head lock against the fixture Can be installed closer to a free edge than traditional expansion anchors Fully removable and reinstallable in same hole (see www.DEWALT.com) Fast installation with powered impact...

  • DeWalt SCREW-BOLT+ 1/2" x 6" Hex Washer Head Galvanized Screw Anchor - 25 Qty

    Stanley Black and Decker
    $50.40 - $50.40
    $50.40
    $50.40 - $50.40
    $50.40
    In Stock

    The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor bod...

  • DeWalt SCREW-BOLT+ 3/8" x 2-1/2" Flat Head Screw Anchor - 50 Qty

    Stanley Black and Decker
    $56.49 - $56.49
    $56.49
    $56.49 - $56.49
    $56.49
    In Stock

    The Screw-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head or flat head (countersunk). Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor bod...
  • 340cd6b3-4cb2-4846-a610-24932853351f.jpeg

    DeWalt POWER-BOLT‚®+ 3/8" x 4" Hex Washer Head Heavy Duty Sleeve Anchor - 50 Qty

    Stanley Black and Decker
    $193.85 - $193.85
    $193.85
    $193.85 - $193.85
    $193.85
    In Stock

    Features Consistent performance in high and low strength concrete Nominal drill bit size is the same as the anchor diameter Anchor can be installed through standard fixture holes Length ID code and identifying marking stamped on head of each anchor Anchor design allows for follow-up expansion after setting under tensile loading High shear load capacity Specifications Country of Origin: CHN Connection Design - Sleeve: Concrete Only Diameter (in) - Sleeve: 0.375 Fastener Type - Sleeve: Mech...
  • 323655fa-0583-480e-960c-7ccd93af1a5e.jpeg

    ELCO 1/4-14" x 1" Type-3 Hex Washer Head - 3000 Qty

    Stanley Black and Decker
    $227.69 - $227.69
    $227.69
    $227.69 - $227.69
    $227.69
    In Stock

    Features Eliminates separate drilling and tapping operations Fasteners coated with Stalgard® and Gray Stalgard® finish typically show no red rust or other base metal corrosion on significant surfaces after 1000 hours of 5% neutral salt spray exposure (per ASTM B117) Screws with EPDM Bonded Sealing washers are available in multiple sizes and configurations for applications requiring a weather-tight seal Fasteners coated with Gray Stalgard® are compatible with ACQ-treated lumber with retentio...

  • Makita 3-1/4" High-Speed Steel Planer Blade - 2/Pack

    Makita
    $14.13 - $14.13
    $14.13
    $14.13 - $14.13
    $14.13
    In Stock

    Features Specially designed for faster and smoother planing Resharpenable high speed steel for longer life Ideal for planing of wood For use with Makita 3-1/4" Planer models KP0800K, KP0810, XPK01, N1900B, and 1902 Compatible with some other brands 3-1/4" Planers PRECISION - Specially designed for faster and smoother planing DURABILITY - Made of high-speed steel APPLICATIONS - Ideal for planing of wood COMPATIBILITY - For use with Makita 3-1/4" planer models KP0800K, KP0810, XPK01, N1900B, ...

  • Makita 12" Flexible Impact Bit Holder

    Makita
    $30.78 - $30.78
    $30.78
    $30.78 - $30.78
    $30.78
    In Stock

    Features Designed exclusively for high-torque impact drivers Ergonomic grip for comfort Convenient 12" length for those hard to reach places High-quality steel engineered for use with impact drivers Ideal for driving screws in a wide variety of heavy-duty fastening applications including deck building, framing and installing plywood subfloor 1/4" hex shank works directly with both Impact Drivers and Drill-Drivers POWER - Designed exclusively for high-torque impact drivers COMFORT - Ergonomi...

Clearance Center

  • Werner Self Trailing Rope Grab with 50% OFF Stainless Steel
    Save 50% Save %
    Save 50% Save %

    Werner Self Trailing Rope Grab with Shock Pack, Stainless Steel

    Werner Fall Protection
    $162.00
    $162.00 - $162.00
    $162.00
    $81.00
    $81.00 - $81.00
    $81.00
    Only 1 left!

    The Werner Self-Trailing Rope Grab delivers reliable, hands-free fall protection for professionals working at height. Designed for 5/8-inch (16 mm) synthetic rope lifelines, this stainless steel rope grab automatically follows the user’s movement up and down the lifeline, providing smooth mobility and instant locking in the event of a fall. Built from premium stainless steel, the L240002 offers superior corrosion resistance and long-term durability in tough jobsite conditions. The integrated ...
  • Werner 6 ft DeCoil Tie-Back Twin Leg Lanyard, durable fall protection harness with integrated energy absorber, now available at 50% off.
    Save 50% Save %
    Save 50% Save %

    Werner 6 ft DeCoil Tie-Back Twin Leg Lanyard

    Werner Fall Protection
    $415.20
    $415.20 - $415.20
    $415.20
    $207.60
    $207.60 - $207.60
    $207.60
    Only 7 left!

    The Werner Twin Leg Lanyard comes with a 50% offer and is designed to deliver premium fall protection, flexibility, and durability for workers in construction, maintenance, and industrial environments. Featuring tie-back capability, it allows the user to anchor directly to the structure, eliminating the need for a separate anchorage connector. With twin-leg construction, this lanyard offers 100% tie-off — ensuring continuous protection when moving between anchor points. The integrated DeCoil ...
  • Werner LITEFIT™ Small Construction Harness with tongue buckle legs — 50% off.
    Save 50% Save %
    Save 50% Save %

    Werner LITEFIT™ Construction Harness Tongue Buckle Legs Small

    Werner Fall Protection
    $1,491.80
    $1,491.80 - $1,491.80
    $1,491.80
    $745.90
    $745.90 - $745.90
    $745.90
    10+ in stock

    The Werner LITEFIT™ Construction Harness in half of the price delivers all-day comfort, superior fit, and dependable safety for construction professionals working at height. Designed with Werner’s trusted engineering, this full-body fall arrest harness provides the perfect balance between lightweight comfort and heavy-duty durability. The tongue buckle leg straps allow for easy adjustment and a secure fit, while the built-in back D-ring ensures reliable fall arrest connection. Featuring durab...
  • Werner 50 ft Max Patrol Self-Retracting Lifeline, Galvanized Cable at 50% off

    Werner 50 ft Max Patrol Self-Retracting Lifeline, Galvanized Cable

    Werner Fall Protection
    $440.80 - $440.80
    $440.80
    $499.00
    $499.00 - $499.00
    $499.00
    Only 1 left!

    The Werner 50 ft Self-Retracting Lifeline (SRL) with galvanized steel cable provides reliable fall protection with superior reach and mobility and get 50% offer. Engineered for overhead use, this Class 1 SRL is designed to arrest falls quickly while minimizing impact forces on the user. Built with Werner’s advanced internal braking system, the Max Patrol™ SRL offers smooth deceleration and quick activation, enhancing safety in elevated work environments. The durable galvanized steel cable res...
  • Save 50% Save %
    Save 50% Save %

    Safewaze 11 ft Cable Class A Self-Retracting Lifeline with Snap Hook

    Safewaze
    $149.00
    $149.00 - $149.00
    $149.00
    $74.50
    $74.50 - $74.50
    $74.50
    Only 1 left!

    The Safewaze 11 ft Cable Class provides dependable, compact fall protection for workers at height. Designed for safety, portability, and performance, this Class A SRL features a durable galvanized steel cable and double-locking swivel snap hook to ensure secure attachment in all conditions. Engineered for construction, maintenance, and industrial applications, this self-retracting lifeline offers smooth lifeline retraction, rapid fall arrest, and minimal impact force in the event of a fall. I...
  • Radians Tecona® Smoke Anti-Fog Safety Glasses
    Save 50% Save %
    Save 50% Save %

    Radians Tecona® Smoke Anti-Fog Safety Glasses

    Radians
    $201.24
    $201.24 - $201.24
    $201.24
    $100.62
    $100.62 - $100.62
    $100.62
    10+ in stock

    The Radians Tecona offers dependable eye protection with a lightweight and stylish wraparound design. Engineered for comfort and durability, these glasses feature a scratch-resistant smoke lens that reduces glare and eye strain in bright outdoor conditions — perfect for construction, landscaping, or industrial work. The anti-fog coating ensures clear vision even in humid or high-heat environments, while the vented rubber nosepiece and rubber-tipped temples provide a secure, non-slip fit throu...