Skip to content

HOTLINE - 1-888-514-515

Free Shipping On Orders $75+

100% secure payment

HOTLINE - 1-888-514-515 | Free Shipping On Orders $75+ | 100% secure payment

Stanley Black and Decker

Stanley Black and Decker power tools are built for professionals who demand performance, reliability, and innovation. From high-torque cordless drills to durable hand tools and fasteners, each product is crafted with precision engineering and industry-tested toughness. The Stanley drill bits and saw blades deliver consistent results in concrete, wood, and metal. Whether you're working commercial construction or residential repair, Stanley Black and Decker delivers trusted quality that gets the job done right.

  • ELCO DRILIT‚® 12-24" x 1-14" 5-Point Self Drill Screw with Extended Drill Capacity - 4000 Qty

    Stanley Black and Decker
    Original price $420.00 - Original price $420.00
    Original price
    $420.00
    $420.00 - $420.00
    Current price $420.00
    In Stock

    Drilit self-drilling fasteners eliminate separate drilling and tapping operations for faster, more economical installations. Features Eliminates separate drilling and tapping operations Fasteners coated with Stalgard and Gray Stalgard finish typically show no red rust or other base metal corrosion on significant surfaces after 1000 hours of 5% neutral salt spray exposure (per ASTM B117) Screws with EPDM Bonded Sealing washers are available in multiple sizes and configurations for applicatio...

  • DeWalt ULTRACON+® SS4 1/4" x 6" 410SS Hex Washer Head Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $97.14 - Original price $97.14
    Original price
    $97.14
    $97.14 - $97.14
    Current price $97.14
    In Stock

    Features Special heat treatment to protect inherent corrosion resistance of the 410 stainless steel material Stalgard coating provides 1000 hours of salt spray protection when tested in accordance with ASTM B117 Manufactured by DEWALT Ultracon Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fastener Type - Masonry & Concrete: Mechanical Anchor Fastener Color / Finish - Masonry &...

  • Save 50% Save %

    DeWalt MINI-UNDERCUT+ 3/8" x 3/4" Internally Threaded Undercut Anchor - 100 Qty

    Stanley Black and Decker
    Original price $162.00
    Original price $162.00 - Original price $162.00
    Original price $162.00
    Current price $81.00
    $81.00 - $81.00
    Current price $81.00
    10+ in stock

    The DeWalt MINI-UNDERCUT+ 3/8 x 3/4 Internally Threaded Undercut Anchor (PFM2111820) is a high-performance anchoring solution designed for demanding concrete applications now available at 50% OFF for a limited time. Made as a cracked-concrete-tested alternative to traditional mini drop-in anchors, this anchor delivers reliable holding power with reduced embedment depth. Ideal for precast hollow-core plank and post-tensioned concrete slabs, the MINI-UNDERCUT+ anchor features a redesigned ANSI ...

  • DeWalt ULTRACON+® SS4 1/4" x 3-1/4" 410SS Hex Washer Head Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $53.25 - Original price $53.25
    Original price
    $53.25
    $53.25 - $53.25
    Current price $53.25
    In Stock

    Features Special heat treatment to protect inherent corrosion resistance of the 410 stainless steel material Stalgard coating provides 1000 hours of salt spray protection when tested in accordance with ASTM B117 Manufactured by DEWALT Ultracon Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fastener Type - Masonry & Concrete: Mechanical Anchor Fastener Color / Finish - Masonry &...

  • Ships within 1 week

    DeWalt POWER-BOLT‚® 1/2" x 4-3/4" 304SS Hex Head Heavy-Duty Sleeve Anchor - 25 Qty

    Stanley Black and Decker
    Original price $207.37 - Original price $207.37
    Original price
    $207.37
    $207.37 - $207.37
    Current price $207.37
    Ships within 1 week

    Features High load capacity Two-level expansion mechanism Internal high strength bolt is removable and reusable Compression zone in sleeve clamps fixture to the base material Low profile finished head design Specifications Country of Origin: TWN Connection Design - Sleeve: Concrete Only Diameter (in) - Sleeve: 0.5 Fastener Type - Sleeve: Mechanical Anchor Indoor / Outdoor - Sleeve: Indoor/Outdoor Length (in) - Sleeve: 4.75 Solid Wall Anchor Application - Sleeve: Concrete Fastener Category...

  • DeWalt Accu-Bit 5/8" x 3/4" Stop Drill Bit for Mini-Undercut+ Anchore

    Stanley Black and Decker
    Original price $20.15 - Original price $20.15
    Original price
    $20.15
    $20.15 - $20.15
    Current price $20.15
    In Stock

    Specifications Anchor Diameter: 3/8" Drill Diameter: 5/8" Drill Depth: 3/4" Std Pack: 1 Downloads Mini-Undercut+™ Manual

  • DeWalt WEDGE-BOLT 3/8" x 3" 316 Stainless Steel Screw Anchor - 50 Qty

    Stanley Black and Decker
    Original price $176.64 - Original price $176.64
    Original price
    $176.64
    $176.64 - $176.64
    Current price $176.64
    In Stock

    Features High corrosion resistance of Type 316 stainless steel Consistent performance in high and low strength concrete Anchor can be installed through standard fixture holes Diameter, length and identifying marking stamped on head of each anchor Can be installed with an impact wrench or conventional hand socket Fast installation and immediate loading minimizes downtime Finished hex head provides attractive appearance and minimizes tripping hazard Can be installed closer to the edge than tr...

  • DeWalt WEDGE-BOLT 3/8" x 4" 316 Stainless Steel Screw Anchor - 50 Qty

    Stanley Black and Decker
    Original price $213.89 - Original price $213.89
    Original price
    $213.89
    $213.89 - $213.89
    Current price $213.89
    In Stock

    Features High corrosion resistance of Type 316 stainless steel Consistent performance in high and low strength concrete Anchor can be installed through standard fixture holes Diameter, length and identifying marking stamped on head of each anchor Can be installed with an impact wrench or conventional hand socket Fast installation and immediate loading minimizes downtime Finished hex head provides attractive appearance and minimizes tripping hazard Can be installed closer to the edge than tr...

  • DeWalt ULTRACON+‚® SS4 1/4" x 5" 410SS Hex Washer Head Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $80.94 - Original price $80.94
    Original price
    $80.94
    $80.94 - $80.94
    Current price $80.94
    In Stock

    Features Special heat treatment to protect inherent corrosion resistance of the 410 stainless steel material Stalgard coating provides 1000 hours of salt spray protection when tested in accordance with ASTM B117 Manufactured by DEWALT Ultracon Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fastener Type - Masonry & Concrete: Mechanical Anchor Fastener Color / Finish - Masonry &...

  • DeWalt ULTRACON‚® SS4 1/4" x 2-1/4" 410SS Phillips Flat Head Blue Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $53.50 - Original price $53.50
    Original price
    $53.50
    $53.50 - $53.50
    Current price $53.50
    In Stock

    Features Special heat treatment to protect inherent corrosion resistance of the 410 stainless steel material Stalgard coating provides 1000 hours of salt spray protection when tested in accordance with ASTM B117 Manufactured by DEWALT Ultracon Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fastener Type - Masonry & Concrete: Mechanical Anchor Fastener Color / Finish - Masonry &...

  • DeWalt ULTRACON+‚® SS4 1/4" x 4" 410SS Phillips Flat Head Blue Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $72.69 - Original price $72.69
    Original price
    $72.69
    $72.69 - $72.69
    Current price $72.69
    In Stock

    Features Special heat treatment to protect inherent corrosion resistance of the 410 stainless steel material Stalgard coating provides 1000 hours of salt spray protection when tested in accordance with ASTM B117 Manufactured by DEWALT Ultracon Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fastener Type - Masonry & Concrete: Mechanical Anchor Fastener Color / Finish - Masonry &...

  • DeWalt ZAMAC NAILIN‚® 1/4" x 1-1/4" Carbon Steel Mushroom Head Drive Anchor - 100 Qty

    Stanley Black and Decker
    Original price $8.29 - Original price $8.29
    Original price
    $8.29
    $8.29 - $8.29
    Current price $8.29
    In Stock

    Features General purpose anchoring Installs in a variety of base materials Roof Flashing Mechanical Attachments Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Anchors Fastener Type - Masonry & Concrete: Mechanical Anchor Fastener Color / Finish - Masonry & Concrete: Silver Fastener Material - Masonry & Concrete: Steel Length (in) - Masonry & Concrete: 1.25 Diameter (in) - ...

  • DeWalt CRETE-FLEX‚® 3/16" x 1-1/4" 410SS Hex Washer Head Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $27.79 - Original price $27.79
    Original price
    $27.79
    $27.79 - $27.79
    Current price $27.79
    In Stock

    The Crete-Flex anchor is a 410 stainless steel screw anchor for light to medium duty applications in concrete and masonry block base materials. Crete-Flex anchors utilize more robust threads for enhanced thread engagement and “V” notches for efficient tapping. These features provide reduced installation torque and increased performance. Crete-Flex anchors feature a Stalgard coating and provide enhanced corrosion resistance over carbon steel fasteners. Features Special heat treatment provide...

  • DeWalt POWER-STUD‚®SD6 1/2" x 4-1/2" 316SS Wedge Expansion Anchor - 50 Qty

    Stanley Black and Decker
    Original price $198.97 - Original price $198.97
    Original price
    $198.97
    $198.97 - $198.97
    Current price $198.97
    In Stock

    Features Fully threaded, medium duty all-purpose anchor Length ID stamped on each threaded anchor Anchors can be installed through the fixture for hole spotting not required Chamfered impact section prevents damage to threads Clip design prevents spinning during installation Nominal drill bit diameter same as anchor diameter Specifications Country of Origin: CHN Connection Design - Wedge: Concrete Only Diameter (in) - Wedge: 0.5 Fastener Type - Wedge: Mechanical Anchor Indoor / Outdoor - ...

  • DeWalt SPIKE‚® 3/8" x 3" 316SS Mushroom Head Pin Anchor - 25 Qty

    Stanley Black and Decker
    Original price $59.32 - Original price $59.32
    Original price
    $59.32
    $59.32 - $59.32
    Current price $59.32
    In Stock

    Features Pre-expanded anchor design allows for easy installation Mushroom and flat head Spike anchors are tamper-proof Forming Spike, which is removable, can be used for temporary installations Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated) Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Anchors Fastener Type - Masonry & Concrete: ...

  • DeWalt SPIKE‚® 3/8" x 2-1/2" 316SS Mushroom Head Pin Anchor - 25 Qty

    Stanley Black and Decker
    Original price $86.27 - Original price $86.27
    Original price
    $86.27
    $86.27 - $86.27
    Current price $86.27
    In Stock

    Features Pre-expanded anchor design allows for easy installation Mushroom and flat head Spike anchors are tamper-proof Forming Spike, which is removable, can be used for temporary installations Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated) Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Anchors Fastener Type - Masonry & Concrete: ...

  • Save 92% Save %

    DeWalt 3/4" x 1" Insulated Cable Staples - 540/Pack

    Stanley Black and Decker
    Original price $183.80
    Original price $183.80 - Original price $183.80
    Original price $183.80
    Current price $14.98
    $14.98 - $14.98
    Current price $14.98
    In Stock

    Features For use with DCN701 stapler Quantity 540 pack Length 1 In. Insulated cable staples Specifications Country of Origin: CHN Callout Size - Insulated Staples: 3/4 In. x 1 In. Fastener Category - Insulated Staples: Nails Fastener Color / Finish - Insulated Staples: Silver Length (in) - Insulated Staples: 1 Material - Insulated Staples: Metal Nail Name - Insulated Staples: Insulated Staples Package Weight (lbs) - Insulated Staples: 1.5 Width (in) - Insulated Staples: 0.75

  • DeWalt AGGRE-GATOR‚® 1/4" x 1-1/4" Hex Washer Head Bi-Metal Screw Anchor - 50 Qty

    Stanley Black and Decker
    Original price $39.24 - Original price $39.24
    Original price
    $39.24
    $39.24 - $39.24
    Current price $39.24
    In Stock

    Features High in-place value over life of structure High strength and ductility Stalgard GB coating creates greater galvanic compatibility in dissimilar metal applications involving aluminum Thread profile provides quick cutting and stability during installation Best choice for ACQ-treated lumber Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fastener Type - Masonry & Concrete:...

  • DeWalt ULTRACON+‚® SS4 1/4" x 1-1/4" 410SS Hex Washer Head Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $31.39 - Original price $31.39
    Original price
    $31.39
    $31.39 - $31.39
    Current price $31.39
    In Stock

    The Dagger-Lok #8 x 2 ; Square Round Washer Head Coarse Wood Screws are designed for high-performance wood fastening in construction, carpentry, and general woodworking applications. Featuring a Type 17 self-starting point, these screws reduce splitting and allow faster penetration into wood substrates without pre-drilling. The round washer head provides increased load distribution and superior holding strength, while the square drive ensures excellent bit engagement and reduced cam-out durin...

  • DeWalt ULTRACON+‚® SS4 1/4" x 2-3/4" 410SS Hex Washer Head Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $38.79 - Original price $38.79
    Original price
    $38.79
    $38.79 - $38.79
    Current price $38.79
    In Stock

    Features Special heat treatment to protect inherent corrosion resistance of the 410 stainless steel material Stalgard coating provides 1000 hours of salt spray protection when tested in accordance with ASTM B117 Manufactured by DEWALT Ultracon Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Concrete: Screws Fastener Type - Masonry & Concrete: Mechanical Anchor Fastener Color / Finish - Masonry &...

  • DeWalt POWER-STUD‚®SD6 1/4" x 3-1/4" 316SS Wedge Expansion Anchor - 100 Qty

    Stanley Black and Decker
    Original price $131.19 - Original price $131.19
    Original price
    $131.19
    $131.19 - $131.19
    Current price $131.19
    In Stock

    Features Fully threaded, medium duty all-purpose anchor Length ID stamped on each threaded anchor Anchors can be installed through the fixture for hole spotting not required Chamfered impact section prevents damage to threads Clip design prevents spinning during installation Nominal drill bit diameter same as anchor diameter Specifications Country of Origin: CHN Connection Design - Wedge: Concrete Only Diameter (in) - Wedge: 0.25 Fastener Type - Wedge: Mechanical Anchor Indoor / Outdoor -...

  • DeWalt POWER-STUD‚®+ SD4 3/8" x 3" 304SS Wedge Expansion Anchor - 50 Qty

    Stanley Black and Decker
    Original price $53.28 - Original price $53.28
    Original price
    $53.28
    $53.28 - $53.28
    Current price $53.28
    In Stock

    Features Fully threaded, medium duty all-purpose anchor Length ID stamped on each threaded anchor Anchors can be installed through the fixture for hole spotting not required Chamfered impact section prevents damage to threads Clip design prevents spinning during installation Nominal drill bit diameter same as anchor diameter Specifications Country of Origin: CHN Connection Design - Wedge: Concrete Only Diameter (in) - Wedge: 0.375 Fastener Type - Wedge: Mechanical Anchor Indoor / Outdoor ...

  • DeWalt 1/2" x 4" 316SS Wedge-Bolt Screw Anchor - 50 Qty

    Stanley Black and Decker
    Original price $389.00 - Original price $389.00
    Original price
    $389.00
    $389.00 - $389.00
    Current price $389.00
    In Stock

    Features High corrosion resistance of Type 316 stainless steel Consistent performance in high and low strength concrete Anchor can be installed through standard fixture holes Diameter, length and identifying marking stamped on head of each anchor Can be installed with an impact wrench or conventional hand socket Fast installation and immediate loading minimizes downtime Finished hex head provides attractive appearance and minimizes tripping hazard Can be installed closer to the edge than tr...

  • DeWalt CRETE-FLEX‚® #14 x 6" 410SS Phillips Flat Head Screw Anchor - 100 Qty

    Stanley Black and Decker
    Original price $147.99 - Original price $147.99
    Original price
    $147.99
    $147.99 - $147.99
    Current price $147.99
    In Stock

    Features Special heat treament provides increased ductility and corrosison resistance Larger-than-normal root diameters offers improved performance, including higher shear strengths Stalgard® coating provides 1000 hours of salt spray protection when tested in accordance with ASTM B117 Available in various head styles to fit the intended application Specifications Country of Origin: TWN Connection Design - Masonry & Concrete: Concrete & Masonry Fastener Category - Masonry & Con...

Engineered for Dependability in Every Cut and Connection


  • Power Tools with Professional Torque
  • Stanley Black and Decker power tools are built for daily use, offering high power output, ergonomic design, and extended battery life.


  • Precision Drill Bits
  • Stanley drill bits are crafted for clean, accurate holes in a variety of materials, reducing wear and improving drilling efficiency.


  • Durable Saw Blades
  • Stanley saw blades provide smooth, consistent cuts across wood, plastic, and light metal, with reinforced edges for extended life.


  • Fasteners That Hold Strong
  • Stanley Black and Decker fasteners are engineered for secure, long-lasting holds - perfect for framing, decking, and general assembly.


  • Built to Withstand the Jobsite
  • With durable construction and professional-grade specs, every tool and accessory is made to thrive in heavy-duty work environments.



Frequently Asked Questions About Stanley Black and Decker


What materials can Stanley drill bits be used on?

Stanley drill bits work effectively on wood, metal, plastic, and masonry.


Do Stanley saw blades fit other tool brands?

Most Stanley saw blades are compatible with major tool brands, but always check size and arbor specs.


How long do Stanley fasteners hold up under stress?

Stanley fasteners are designed for maximum strength and long-term structural integrity.


Are replacement blades and bits available?

Yes, Power Bolt and Tool carries a full range of Stanley Black and Decker accessories and replacements.


Is there a difference between Stanley hand tools and power tools?

Yes, Stanley hand tools are manual, while their power tools include electric or cordless operation with advanced features.