Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 12-inch 96-tooth saw blade for medium aluminium cutting applications.
Diablo

Diablo 12" x 96-T Saw Blade for Medium Aluminum

$146.08 - $146.08
$146.08
$146.08 - $146.08
$146.08
Availability:
In Stock
SKU D1296N

Package Quantity: 1

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D1296N 12-inch, 96-tooth circular saw blade is designed for cutting medium-thickness aluminum and other non-ferrous materials. Its carbide teeth and Triple Chip Grind (TCG) tooth geometry support clean, accurate cuts with reduced burrs. The thin kerf helps remove less material, while laser-cut stabilizer vents help reduce vibration and noise. A Perma-SHIELD non-stick coating helps resist heat, gumming and corrosion. The Diablo D1296N 7-1/4-inch-style search term is not the correct size for this model: the D1296N is a 12-inch blade, so check saw and arbor compatibility before purchase.



  • Designed for Medium Aluminum Cutting

    The blade is designed for cutting medium aluminum stock from 3/32 to 1/4 inch thick, along with compatible non-ferrous materials.




  • 96-Tooth TCG Design

    The 96-tooth Triple Chip Grind configuration is designed to support clean, precise cuts when working with suitable aluminum applications.




  • Reduced Burrs on Aluminum

    The TCG tooth geometry helps minimise burrs and supports a cleaner edge on suitable aluminum cuts.




  • TiCo Micro-Grain Carbide

    TiCo micro-grain carbide teeth are designed to provide wear resistance and extended cutting life.




  • Thin 0.091-Inch Kerf

    The 0.091-inch kerf removes a relatively narrow strip of material during cutting.




  • Laser-Cut Stabilizer Vents

    Laser-cut stabilizer vents help control vibration and noise for more consistent cutting.




  • Perma-SHIELD Non-Stick Coating

    Perma-SHIELD coating helps reduce heat buildup, material buildup and corrosion during cutting.




  • Suitable for Non-Ferrous Materials

    Alongside medium aluminum, the blade is suitable for compatible non-ferrous materials including copper and brass.




  • Aluminum Extrusion Applications

    The blade is suited to compatible aluminum extrusion cutting applications where a clean, burr-reduced finish is required.




  • 1-Inch Arbor

    The 1-inch arbor provides a key compatibility specification for matching the blade to a suitable saw.






  • Brand:
    Diablo
  • Model / MPN / SKU:
    D1296N
  • Product Type:
    Circular saw blade for medium aluminum
  • Blade Diameter:
    12 inches
  • Number of Teeth:
    96
  • Tooth Geometry:
    Triple Chip Grind (TCG)
  • Blade Material:
    Carbide-tipped
  • Arbor Size:
    1 inch
  • Kerf / Cut Width:
    0.091 inch
  • Plate Thickness:
    0.071 inch
  • Hook Angle:
    -5 degrees
  • Maximum RPM:
    5,000 RPM
  • Primary Application:
    Medium aluminum cutting
  • Other Suitable Materials:
    Copper, brass, plastics and fiberglass, subject to tool and material suitability
  • Coating:
    Perma-SHIELD non-stick coating
  • Stabilization Feature:
    Laser-cut stabilizer vents
  • Suggested Saw Types:
    Compatible miter saws and other approved stationary saws


Frequently Asked Questions

The Diablo D1296N is a 12-inch, 96-tooth aluminium-cutting blade designed for medium aluminium applications, including material within the 3/32 to 1/4-inch thickness range. Its TCG tooth geometry and carbide cutting edges are designed for clean, accurate cuts in non-ferrous materials when used with a compatible miter saw.

The Diablo D1296N is specifically positioned for medium aluminium in the 3/32 to 1/4-inch thickness range. It combines 96 teeth with TCG geometry to suit aluminium cutting where a clean, controlled finish is required.

The D1296N uses a 96-tooth TCG configuration designed for cutting aluminium and other non-ferrous materials with a clean cutting action. Using the correct blade for the material, securing the workpiece and maintaining the appropriate cutting technique can also help minimise burr formation.

The Diablo D1296N is a 12-inch blade with a 1-inch arbor and 96 TCG teeth designed for aluminium cutting. Its material-specific design makes it suitable for medium aluminium applications when the blade and miter saw are compatible.

The Diablo D1296N is designed for medium aluminium and is suitable for applications involving aluminium material within its specified thickness range. Before cutting an extrusion, confirm its thickness, profile and stability, and make sure the 12-inch blade and 1-inch arbor are compatible with the miter saw.

Use a blade specifically designed for aluminium, such as the D1296N, rather than a general-purpose wood-cutting blade. Its 96-tooth TCG geometry and carbide construction are designed for non-ferrous-metal cutting, while secure workpiece support and an appropriate saw setup can further improve cutting results.

Burrs can result from using an unsuitable blade, incorrect cutting technique, poor workpiece support or a blade that is worn or damaged. The D1296N's TCG geometry is designed for aluminium and other non-ferrous materials, but correct setup and material compatibility remain important for achieving clean edges.

Use a compatible saw and blade, ensure the blade is installed correctly and securely support the aluminium before cutting. The D1296N incorporates laser-cut stabilizer vents and a balanced design intended to help control vibration during cutting.

The Diablo D1296N is a 12-inch, 96-tooth TCG blade designed for medium aluminium cutting and other non-ferrous applications. Check the current PowerBolt & Tool listing for the latest price and availability, as stock and pricing can change.

The D1296N is purpose-built for medium aluminium applications and combines 96 TCG teeth, carbide cutting edges and a 1-inch arbor. It can be suitable for a compatible 12-inch miter saw, provided the saw meets the blade's diameter, arbor and speed requirements.

TCG, or Triple-Chip Grind, uses a combination of chamfered and flatter tooth profiles to distribute the cutting action across the tooth pattern. This geometry is well suited to non-ferrous metals such as aluminium and can support clean, controlled cuts when the blade is matched to the material.

Check the blade diameter, tooth count, TCG geometry, arbor size, kerf and the thickness range of aluminium the blade is designed to cut. For the D1296N, the key specifications include a 12-inch diameter, 96 TCG teeth, 1-inch arbor, 0.091-inch kerf and suitability for medium aluminium from approximately 3/32 to 1/4 inch.

The Diablo D1296N matches these specifications, with a 12-inch diameter, 96 TCG teeth and a 1-inch arbor. It is designed for medium aluminium and other non-ferrous applications where the blade and saw are correctly matched.

The D1296N is designed for medium aluminium approximately 3/32 to 1/4 inch thick. Check the actual material thickness and profile before cutting to ensure it falls within the blade's intended application range.

The Diablo D1296N has a listed kerf of 0.091 inch. Kerf is the width of material removed by the blade, so it is an important specification when considering cutting accuracy, material removal and compatibility with the intended application.