Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 7-1/4-inch 48-tooth Steel Demon Cermet II saw blades for medium metal cutting, 5-piece pack.
Diablo

Diablo 7-1/4" x 48-Teeth Steel Demon Cermet II Saw Blade for Medium Metal - 5 Pcs

$69.80 - $69.80
$69.80
$69.80 - $69.80
$69.80
Availability:
In Stock
SKU D0748CFA

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D0748CFA 7-1/4-inch, 48-tooth Steel Demon Cermet II saw blade is designed for cutting medium-thickness metal and compatible stainless steel using a suitable corded or cordless circular saw. Its Cermet II ceramic-metallic teeth offer high heat tolerance and hardness for wear resistance, while the Triple Chip Grind (TCG) tooth design supports precise cuts with reduced burrs and sparks. The thin 0.075-inch kerf helps reduce cutting resistance and heat buildup, while laser-cut stabilizer vents help control vibration for straighter cuts. The Perma-SHIELD non-stick coating helps resist gumming and corrosion. This Diablo D0748CFA 5-piece pack is suitable for metalworking tasks involving compatible steel studs, angle iron, flat bar, channel and EMT conduit.


  • Cermet II Ceramic-Metallic Teeth

    The specialised Cermet II teeth combine hardness and heat tolerance to support wear resistance during repeated metal-cutting applications.



  • 48-Tooth Triple Chip Grind Design

    The 48-tooth TCG configuration is designed for controlled metal cutting. Its tooth geometry supports clean cuts in compatible steel profiles while helping reduce burr formation.



  • Designed for Medium Metal Cutting

    The D0748CFA is intended for specified metal profiles, including steel studs, angle iron, flat bar, channel and EMT conduit, within the manufacturer's recommended thickness limits.



  • Suitable for Mild and Stainless Steel

    The blade is positioned for cutting both mild steel and stainless steel within its intended application range, making it a potential option for jobs involving these two materials.



  • Designed for Reduced Sparking and Heat

    The blade's metal-cutting design is promoted as producing fewer sparks and less heat than standard abrasive cut-off discs. Actual results depend on the material, equipment and cutting conditions.



  • 0.075-Inch Thin Kerf

    The 0.075-inch kerf removes a relatively narrow strip of material, helping reduce cutting resistance and supporting efficient cuts in compatible metal stock.



  • Laser-Cut Stabilizer Vents

    The stabilizer vents help control vibration and noise during cutting, supporting more controlled operation. Correct blade installation and secure workpiece support remain important.



  • Laser-Cut Arbor

    The laser-cut arbor is a key blade-construction feature intended to support stable rotation. Check the arbor specification and saw requirements before fitting the blade.



  • Perma-SHIELD Protective Coating

    The non-stick coating helps reduce friction, heat buildup, gumming and corrosion, supporting consistent performance during suitable metal-cutting tasks.



  • 7-1/4-Inch Blade with 5/8-Inch Arbor

    The blade diameter and arbor details help users assess fit with their circular saw. Confirm the saw's compatibility, permitted blade type and manufacturer requirements before use. Verify the maximum RPM against the current product specification, as the supplied research identifies conflicting speed ratings.






  • Brand:
    Diablo

  • Model / MPN / SKU:
    D0748CFA

  • Product Type:
    Steel Demon Cermet II Saw Blade for Medium Metal

  • Pack Quantity:
    5 blades

  • Blade Diameter:
    7-1/4 inches

  • Number of Teeth:
    48

  • Tooth Geometry:
    Triple Chip Grind (TCG)

  • Cutting Edge Material:
    Cermet II ceramic-metallic

  • Arbor Size:
    5/8 inch

  • Kerf / Cut Width:
    0.075 inch

  • Plate Thickness:
    0.063 inch

  • Hook Angle:
    2 degrees

  • Maximum RPM:
    5,800 RPM

  • Primary Application:
    Medium metal cutting

  • Suitable Materials:
    Specified steel studs, angle iron, flat bar, channel and EMT conduit

  • Coating:
    Perma-SHIELD non-stick coating

  • Stabilization Feature:
    Laser-cut stabilizer vents

  • Arbor Feature:
    Laser-cut arbor

  • Recommended Saw Types:
    Compatible corded and cordless circular saws

  • Country of Origin:
    Italy, as listed by a retailer


Frequently Asked Questions

The Diablo D0748CFA is a 7-1/4-inch, 48-tooth TCG metal-cutting blade designed for applications such as steel studs, steel channel and EMT conduit. Its Cermet II cutting teeth are designed for controlled metal cutting, helping produce cleaner edges with fewer sparks than abrasive cut-off discs.

The Diablo D0748CFA is designed to cut both mild steel and stainless steel, offering a single-blade option for suitable applications in both materials. Check the material thickness limits and your saw's compatibility before cutting, as the blade is intended for specified metal-cutting applications rather than every steel section.

The Diablo D0748CFA is designed for metal cutting and is suitable for applications including angle iron and flat bar within its specified thickness range. Its 48-tooth TCG design produces controlled cuts with fewer sparks and burr-free finishes, which can help reduce post-cut grinding and rework.

The Diablo D0748CFA matches those specifications, with a 7-1/4-inch diameter, 48 TCG teeth and a 5/8-inch arbor. It uses Cermet II cutting technology and is designed for metal applications such as steel studs, angle iron and EMT conduit.

Look for a metal-cutting blade with a thin kerf and a design intended for controlled cutting, such as the Diablo D0748CFA, which has a 0.075-inch kerf and Cermet II teeth. Diablo states that its metal-cutting blade design can deliver more cuts per charge than standard metal-cutting circular saw blades, but actual battery use depends on the saw, battery, metal and cutting conditions.

A dedicated Cermet II metal-cutting blade, such as the Diablo D0748CFA, uses a toothed cutting action rather than the abrasive action of a cut-off disc. Its TCG design is intended to produce precise cuts with fewer sparks and burr-free edges, although sparks can still occur and suitable eye, hearing and other protective equipment remain essential.

The Diablo D0748CFA is designed for cooler, controlled metal cutting compared with conventional abrasive cut-off discs, which can generate substantial heat and discolour steel. Its Cermet II teeth, thin kerf and Perma-SHIELD coating help manage cutting heat, but the result depends on the material, blade condition, cutting technique and workpiece setup.

The Diablo D0748CFA is intended for steel tubing with wall thicknesses from 1/16 inch to 1/4 inch, subject to the manufacturer's application guidance. Its 48-tooth TCG design and controlled cutting action help produce clean, burr-free cuts, while secure clamping and correct saw setup support accurate results.

The Diablo D0748CFA is a 7-1/4-inch, 48-tooth TCG Cermet II blade designed for metal cutting with compatible circular saws. It is intended for materials including steel studs, angle iron, flat bar and EMT conduit, so check the specified material limits and saw requirements before use.

The Diablo D0748CFA is designed for these metal-cutting applications and has a 5/8-inch arbor, 48 TCG teeth and a 0.075-inch kerf. It is intended for medium-metal applications, including steel studs and tubing with wall thicknesses from 1/16 inch to 1/4 inch and plates or bars from 1/8 inch to 1/2 inch thick.

A Cermet blade such as the Diablo D0748CFA uses toothed cutting action to produce controlled cuts, with fewer sparks and cleaner edges than typical abrasive cut-off discs. Abrasive discs may suit some cutting setups, but a dedicated metal-cutting blade can reduce heat build-up and finishing work; actual cutting speed and consumable life depend on the application, so advertised performance multipliers should not be treated as guaranteed results.

The Diablo D0748CFA is listed for use with compatible corded and cordless circular saws. Before fitting it, confirm the 7-1/4-inch blade diameter, 5/8-inch arbor configuration, diamond-knockout requirements and the saw's operating speed against the blade rating and both manufacturers' instructions.

The Diablo D0748CFA is a Cermet II metal-cutting blade designed for both mild steel and stainless steel applications. Its 48-tooth TCG configuration supports controlled cutting, but you should still check the permitted material dimensions and confirm compatibility with your circular saw.

The Diablo D0748CFA has a 5/8-inch arbor and a 0.075-inch kerf. It also includes a diamond knockout, so check your saw's arbor shape and the manufacturer's mounting instructions to ensure the blade is fitted correctly.

The current official Diablo product listing specifies a maximum speed of 8,000 RPM for the D0748CFA. Some distributor listings show 5,800 RPM, so confirm the rating on the product packaging or current manufacturer documentation before publishing the specification or using the blade.