Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 7-1/4-inch 60-tooth Ultra Finish carbide saw blade for smooth, clean cuts in wood.
Diablo

Diablo 7-1/4" x 60-Teeth Ultra Finish Carbide Saw Blade for Wood

$39.00 - $39.00
$39.00
$39.00 - $39.00
$39.00
Availability:
In Stock
SKU D0760A

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D0760A 7-1/4-inch, 60-tooth Ultra Finish carbide saw blade is designed for clean, precise cuts in hardwoods, softwoods, plywood, melamine, veneer plywood and delicate moulding. Its TiCo Hi-Density carbide teeth and Alternate Top Bevel (ATB) tooth geometry help minimise splintering and chipping for a smooth finish that requires little to no sanding on suitable cuts. The super-thin 0.059-inch kerf supports efficient cutting, while the Perma-SHIELD non-stick coating helps reduce heat buildup, gumming and corrosion. Tri-metal shock-resistant brazing strengthens the carbide tooth attachment, and the hardened steel body supports durability. The Diablo D0760A Ultra Finish circular saw blade is suitable for compatible 7-1/4-inch circular saws and approved cutting applications.


  • Ultra-Finish Cutting Performance

    The 60-tooth design helps deliver clean, smooth cuts in compatible wood materials, making it suitable for finish carpentry, fine woodworking and projects where edge quality matters.



  • 60-Tooth ATB Configuration

    The 60-tooth count and Alternate Top Bevel geometry are suited to finish-focused cutting. This makes the blade a relevant choice when a smoother edge is more important than the faster, rougher cutting associated with lower-tooth-count blades.



  • TiCo Hi-Density Carbide Teeth

    Application-specific carbide teeth support cutting performance and wear resistance during regular woodworking tasks, including projects involving hardwood and other compatible materials.



  • Alternate Top Bevel Tooth Geometry

    The ATB tooth configuration helps minimise splintering and tear-out when making suitable crosscuts in hardwood, plywood, melamine and delicate wood moulding.



  • Cleaner Cuts in Veneered Plywood

    The blade’s ultra-finish design is intended to help produce clean cuts in veneered plywood while reducing surface chipping. Correct blade setup and cutting technique remain important for achieving the best finish.



  • Suitable for Oak, Pine and Melamine

    The D0760A is designed for finish-oriented cutting in compatible materials such as oak, pine, melamine and veneered plywood. It can also suit delicate moulding where a clean edge is important.



  • Super-Thin 0.059-Inch Kerf

    The 0.059-inch kerf removes a relatively narrow strip of material, helping reduce cutting resistance and material waste while supporting precise cuts.



  • Perma-SHIELD Non-Stick Coating

    The protective coating helps reduce friction, heat buildup, gumming and corrosion, supporting consistent blade performance during woodworking applications.



  • Shock-Resistant Tooth Brazing and Hardened Steel Body

    Tri-metal brazing helps secure the carbide tips, while the hardened steel body supports durability during regular use. Appropriate handling and use within the blade’s specified limits remain essential.



  • 5/8-Inch Arbor and Published Speed Rating

    The 5/8-inch arbor specification helps users check whether the blade fits their saw. Confirm the saw’s arbor, blade diameter and manufacturer requirements before installation. Verify the listed 8,000 RPM maximum against the current manufacturer specification and never exceed the blade’s rated speed.





  • Brand:
    Diablo

  • Model / MPN / SKU:
    D0760A

  • Product Type:
    Ultra Finish Carbide Saw Blade for Wood

  • Blade Diameter:
    7-1/4 inches

  • Number of Teeth:
    60

  • Tooth Geometry:
    Alternate Top Bevel (ATB)

  • Cutting Edge Material:
    TiCo Hi-Density carbide

  • Arbor Size:
    5/8 inch

  • Kerf / Cut Width:
    0.059 inch

  • Plate Thickness:
    0.040 inch

  • Hook Angle:
    10 degrees

  • Maximum RPM:
    8,000 RPM

  • Primary Application:
    Ultra-finish wood cutting

  • Suitable Materials:
    Hardwoods, softwoods, plywood, veneer plywood, melamine, laminate, fibreboard and delicate moulding

  • Coating:
    Perma-SHIELD non-stick coating

  • Tooth Attachment:
    Tri-metal shock-resistant brazing

  • Blade Body:
    Hardened steel

  • Recommended Saw Type:
    Compatible 7-1/4-inch circular saw

  • Pack Size:
    1 blade



Frequently Asked Questions

The Diablo D0760A is a 7-1/4-inch, 60-tooth ATB carbide blade designed for ultra-finish wood cutting. Its fine-cutting configuration is suited to finish-focused applications such as trimming oak, where a cleaner edge can help reduce the amount of sanding needed.

The D0760A's 60-tooth ATB design is intended for clean, finish-focused cuts, making it a potential option for suitable veneered plywood applications. To help minimise chipping, support the panel properly, use a steady feed and confirm that plywood is included in the blade's approved applications.

A 60-tooth blade such as the Diablo D0760A is designed for fine-finish cutting and can suit delicate wood moulding when the blade and saw are compatible with the job. Secure the moulding firmly and use controlled cutting technique to help reduce splintering and preserve the finished edge.

The Diablo D0760A is a 7-1/4-inch, 60-tooth ATB carbide blade positioned for ultra-finish wood cutting. Oak and pine are wood-cutting applications to consider, but check the manufacturer's material guidance before using it on melamine, as the correct blade and setup depend on the panel and saw.

The Diablo D0760A has a 60-tooth ATB configuration designed around fine-finish cutting, making it worth considering when clean edges are a priority. However, a high-tooth-count finish blade may cut more slowly than a lower-tooth-count blade, so confirm its suitability for both crosscuts and rip cuts in your materials before choosing it as an all-purpose option.

Choose a compatible blade designed for fine-finish cuts, such as the Diablo D0760A with its 60-tooth ATB geometry, and check that the blade is approved for veneered plywood. Supporting the panel, securing it against movement and using a steady feed can also help reduce surface chipping.

Use a sharp blade with a finish-oriented tooth configuration, such as the 60-tooth ATB Diablo D0760A, which is designed for ultra-finish wood cutting. Correct blade alignment, firm workpiece support and a controlled feed can help produce a cleaner edge and reduce the need for extra sanding.

Melamine can chip along the cut edge, so choose a blade specifically approved for the panel material and designed to produce a clean finish. The Diablo D0760A has 60 ATB teeth for finish-focused cutting, but confirm its melamine compatibility before use and support the panel carefully to help limit chipping.

The Diablo D0760A is a 7-1/4-inch, 60-tooth ATB carbide blade designed for ultra-finish wood cutting. It is an option to consider for hardwood finishing applications when its specifications and approved uses match your saw and project.

The Diablo D0760A is a 7-1/4-inch, 60-tooth ATB blade designed for fine-finish cutting, making it a candidate for suitable veneered plywood work. Check the manufacturer's material guidance and your saw's compatibility, then support the panel properly to help minimise chipping along the cut.

A 60-tooth blade such as the Diablo D0760A is generally better suited to finish-focused cuts, while a 24-tooth blade typically prioritises faster cutting and is often used for rougher or more general-purpose work. The best choice depends on the material, the type of cut and whether finish quality or cutting speed matters more for the job.

An ultra-finish blade such as the Diablo D0760A uses a higher tooth count and a finish-oriented ATB configuration to prioritise cleaner edges on suitable wood-cutting tasks. A general-purpose blade aims to balance cutting speed and finish across a wider range of jobs, so it may be more versatile when the smoothest possible cut is not the main priority.

The Diablo D0760A is a 7-1/4-inch, 60-tooth ATB carbide blade designed for ultra-finish wood cutting. It may suit oak, suitable plywood and delicate moulding applications, but confirm the blade's approved material uses before cutting veneered or coated panels.

The Diablo D0760A has a 5/8-inch arbor and a 0.059-inch kerf. Check these dimensions against your saw's requirements before installation to ensure the blade fits the tool correctly.

The listed maximum speed for the Diablo D0760A is 8,000 RPM. Do not exceed this rating, and make sure the saw's operating speed and blade-mounting requirements are compatible before use.