Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 6-1/2-inch 40-tooth finish trim saw blade for smooth, precise cuts in wood.
Diablo

Diablo 6-1/2" x 40-Teeth Finish Trim Saw Blade for Wood

$37.03 - $37.03
$37.03
$37.03 - $37.03
$37.03
Availability:
In Stock
SKU D0641A

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D0641A 6-1/2-inch, 40-tooth finish trim saw blade is designed for smooth ripping and crosscutting in hardwoods, softwoods, plywood, laminate, melamine, OSB and other compatible wood materials. Its TiCo Hi-Density carbide teeth and Alternate Top Bevel (ATB) tooth geometry help produce cleaner cuts than general-purpose framing blades. The super-thin 0.059-inch kerf helps reduce cutting resistance and material waste, while the Perma-SHIELD non-stick coating helps minimise heat buildup, gumming and corrosion. Laser-cut stabilizer vents help reduce vibration and noise while keeping the blade cooler, and tri-metal shock-resistant brazing helps secure the carbide tips. The Diablo D0641A finish trim saw blade is suitable for compatible circular saws, trim saws and cordless circular saws.


  • Clean Finish Trim Cutting

    The 40-tooth design balances cutting speed and finish quality for trim work, decking, fencing, fascia and plywood, making it a practical option for a range of jobsite woodworking tasks.



  • 40-Tooth Blade Configuration

    The 40-tooth count offers a middle ground between a lower-tooth-count framing blade and a finer-finish blade, helping balance edge quality with useful cutting speed.



  • TiCo Hi-Density Carbide Teeth

    Application-specific carbide teeth support cutting performance and wear resistance during repeated use in compatible woodworking applications.



  • Alternate Top Bevel Tooth Design

    The ATB tooth geometry helps produce smooth edges when ripping and crosscutting suitable wood products, supporting finish-focused work in lumber and plywood.



  • Versatile Cutting Across Wood-Based Materials

    The D0641A is intended for compatible hardwood, softwood, plywood, OSB, laminate and melamine applications, giving users flexibility across common remodelling and jobsite projects.



  • Suitable for Decking, Fencing and Fascia

    The blade's finish trim positioning makes it relevant for decking, fencing and fascia cuts where a cleaner edge than a typical framing cut may be desirable.



  • Super-Thin 0.059-Inch Kerf

    The 0.059-inch kerf removes a relatively narrow strip of material, helping reduce cutting resistance and material removal while supporting efficient, accurate cuts.



  • Perma-SHIELD Non-Stick Coating

    The protective coating helps reduce friction, heat buildup, gumming and corrosion during normal use, supporting consistent cutting performance.



  • Stabilizer Vents and Shock-Resistant Brazing

    Laser-cut stabilizer vents help control vibration and noise, while tri-metal brazing helps secure the carbide tips to the blade body.



  • 5/8-Inch Arbor and Blade Specifications

    The 5/8-inch arbor and diamond knockout are important fitting details to check against the saw manufacturer's requirements. The listed 0.039-inch plate thickness and 10,000 RPM maximum should be confirmed against the current product specifications before publication or use.





  • Brand:
    Diablo

  • Model / MPN / SKU:
    D0641A

  • Product Type:
    Finish Trim Saw Blade for Wood

  • Blade Diameter:
    6-1/2 inches

  • Number of Teeth:
    40

  • Tooth Geometry:
    Alternate Top Bevel (ATB)

  • Cutting Edge Material:
    TiCo Hi-Density carbide

  • Arbor Size:
    5/8 inch

  • Kerf / Cut Width:
    0.059 inch

  • Plate Thickness:
    0.039 inch

  • Hook Angle:
    15 degrees

  • Maximum RPM:
    10,000 RPM

  • Primary Application:
    Finish trim wood cutting

  • Suitable Materials:
    Hardwoods, softwoods, 2X lumber, laminate, melamine, plywood, OSB and pressure-treated lumber

  • Coating:
    Perma-SHIELD non-stick coating

  • Stabilization Feature:
    Laser-cut stabilizer vents

  • Tooth Attachment:
    Tri-metal shock-resistant brazing

  • Recommended Saw Types:
    Compatible trim saws, circular saws and cordless circular saws

  • Pack Size:
    1 blade



Frequently Asked Questions

The Diablo D0641A is a 6-1/2-inch, 40-tooth ATB carbide blade designed for finish-oriented wood cutting. Its compact size suits compatible portable circular saws, making it an option for hardwood cuts where you want a cleaner edge than a typical framing blade may provide.

The Diablo D0641A combines a 40-tooth ATB design with a 0.059-inch thin kerf, balancing finish-focused cutting with the practical needs of portable saw work. It can be considered for plywood applications, but confirm the blade's approved material uses and your saw's compatibility before cutting.

The Diablo D0641A is a 6-1/2-inch, 40-tooth ATB carbide blade intended for finish-oriented wood cutting, making it worth considering for suitable decking and fascia work. Compared with a typical framing blade, its higher tooth count is geared towards a smoother edge, although the final result depends on the material, blade condition and cutting setup.

The Diablo D0641A is a 6-1/2-inch carbide blade with 40 ATB teeth for finish-focused wood cutting. Check the manufacturer's application guidance for each material, particularly laminate and melamine, and make sure the blade is approved for the material and compatible with your saw.

A finish-oriented blade with a moderate-to-high tooth count can be a practical choice when you need cleaner cuts without moving to a specialised, slower-cutting setup. The Diablo D0641A has 40 ATB teeth and a 0.059-inch thin kerf, making it an option for compatible portable saws when its approved applications match your lumber and plywood tasks.

Choose a blade designed for cleaner cuts, such as the Diablo D0641A with its 40-tooth ATB configuration. Support the plywood close to the cut, secure it against movement and feed the saw steadily, while confirming that the blade is suitable for your panel material.

Framing blades typically prioritise fast cutting and jobsite productivity rather than the smoothest possible finish, so they may leave rougher edges on visible trim. A finish-oriented option such as the Diablo D0641A, with 40 ATB teeth, may be better suited to trim work when a cleaner edge is more important than maximum cutting speed.

The Diablo D0641A has a 0.059-inch thin kerf, meaning it removes a relatively narrow amount of material compared with a wider-kerf blade. A thin kerf can help reduce the effort required to cut, but the result also depends on the saw's condition, blade sharpness, material and feed rate.

The Diablo D0641A is a 6-1/2-inch, 40-tooth ATB carbide blade designed for finish-oriented wood cutting. It is an option to consider for hardwood applications where a smoother cut is desired, provided the blade's specifications and approved uses match your saw and project.

The Diablo D0641A is a 6-1/2-inch, 40-tooth ATB blade designed for finish-focused cutting, making it worth considering for suitable plywood and OSB tasks. Check the manufacturer's material guidance and your saw's compatibility, then support the workpiece securely to help achieve a cleaner edge.

A 40-tooth blade such as the Diablo D0641A is generally more finish-oriented than a typical framing blade, which usually prioritises faster cutting. A framing blade may be more efficient for rough construction cuts, while a 40-tooth blade can be preferable for trim, plywood and other jobs where edge quality matters.

The terms can overlap and are not universal standards, but a finish trim blade generally aims to balance a cleaner edge with practical cutting speed for installation and remodelling work. A fine-finish blade may prioritise surface quality more strongly, sometimes at the expense of cutting speed, so choose according to the material and finish you need.

The Diablo D0641A is a 6-1/2-inch, 40-tooth ATB carbide blade designed for finish-oriented cutting. It may suit hardwood, plywood and suitable decking applications, but verify the manufacturer's approved material uses and your saw's compatibility before selecting it for all three tasks.

The Diablo D0641A has a 5/8-inch arbor with a diamond knockout and a 0.059-inch kerf. Check your saw's arbor configuration and mounting instructions before installation to ensure the blade fits securely and is approved for the tool.

The specified maximum speed for the Diablo D0641A is 10,000 RPM. Never exceed the blade's rated speed, and confirm that your saw's operating speed and mounting requirements are compatible before use.