Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 12-inch 80-tooth fine-finish saw blade for smooth, precise wood cutting.
Diablo

Diablo 12" x 80-Teeth Fine Finish Saw Blade for Wood

$124.37 - $124.37
$124.37
$124.37 - $124.37
$124.37
Availability:
In Stock
SKU D1280X

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D1280X 12-inch, 80-tooth fine finish saw blade is designed for smooth, precise cuts in hardwoods, softwoods, plywood, melamine, MDF and decorative moulding. Its TiCo Hi-Density carbide teeth and High Alternate Top Bevel (Hi-ATB) tooth geometry help produce clean crosscuts while minimising splintering and tear-out. The thin 0.118-inch kerf helps reduce cutting resistance, while the Perma-SHIELD non-stick coating helps protect against heat, gumming and corrosion. Tri-metal shock-resistant brazing strengthens the bond between the carbide teeth and blade body for added durability. The Diablo D1280X fine finish saw blade is suitable for compatible miter saws, sliding miter saws and other approved stationary saws.



  • Fine-Finish Cutting Performance

    The 80-tooth design helps deliver smooth crosscuts in hardwoods, softwoods and compatible sheet materials, reducing the need for additional finishing on suitable cuts.




  • 80-Tooth Blade Configuration

    The high tooth count is suited to finish-oriented woodworking where a smoother cut is preferred over a more general-purpose cutting approach.




  • TiCo Hi-Density Carbide Teeth

    Application-specific carbide supports cutting performance and wear resistance during regular woodworking and finish carpentry tasks.




  • High Alternate Top Bevel Tooth Geometry

    The Hi-ATB tooth design helps minimise splintering and tear-out when cutting veneers, melamine and other delicate wood surfaces.




  • Cleaner Cuts in Veneered Plywood

    The blade's fine-finish geometry is designed to help produce chip-free cuts in veneered plywood when used with suitable equipment and cutting techniques.




  • Suitable for Melamine and MDF

    The blade is positioned for fine-finish cutting in compatible melamine and MDF applications, as well as hardwoods and softwoods.




  • 0.118-Inch Thin Kerf

    The 0.118-inch kerf defines the blade's cutting width and supports precise cutting with a relatively narrow material-removal profile.




  • Perma-SHIELD Non-Stick Coating

    The protective coating helps reduce friction, heat buildup, gumming and corrosion during cutting.




  • Tri-Metal Shock-Resistant Tooth Brazing

    Tri-metal brazing helps secure the carbide teeth to the blade body, supporting durability under normal operating conditions.




  • 1-Inch Arbor for Compatible Saws

    The 1-inch arbor is a key fitting specification when checking compatibility with a 12-inch miter saw or table saw. Always confirm the saw manufacturer's requirements before use.






  • Brand:
    Diablo

  • Model / MPN / SKU:
    D1280X

  • Product Type:
    Fine Finish Saw Blade for Wood

  • Blade Diameter:
    12 inches

  • Number of Teeth:
    80

  • Tooth Geometry:
    High Alternate Top Bevel (Hi-ATB)

  • Cutting Edge Material:
    TiCo Hi-Density carbide

  • Arbor Size:
    1 inch

  • Kerf / Cut Width:
    0.118 inch

  • Plate Thickness:
    0.087 inch

  • Hook Angle:
    7 degrees

  • Maximum RPM:
    5,000 RPM listed by several retailers; verify blade markings

  • Primary Application:
    Fine finish wood cutting

  • Suitable Materials:
    Hardwoods, softwoods, veneered plywood, melamine, MDF and moulding

  • Coating:
    Perma-SHIELD non-stick coating

  • Tooth Attachment:
    Tri-metal shock-resistant brazing

  • Recommended Saw Types:
    Compatible miter saws, sliding miter saws and other approved stationary saws

  • Pack Size:
    1 blade



Frequently Asked Questions

The Diablo D1280X is a 12-inch, 80-tooth fine-finish blade designed for smooth, precise cuts in hardwoods and softwoods. Its Hi-ATB (high alternate top bevel) tooth geometry helps produce a cleaner finish on trim and other detail-focused woodworking projects when used with a compatible miter saw.

The D1280X is designed for fine-finish cutting, and its 80-tooth Hi-ATB configuration is suited to applications where a clean edge matters, including veneered plywood. For the best results, use a compatible saw, secure the workpiece and support the material to help minimise surface chipping.

The Diablo D1280X is a 12-inch, 80-tooth fine-finish blade to consider for clean, finish-focused cuts in suitable wood-based sheet materials. Its Hi-ATB geometry is designed to help improve cut quality, but check the manufacturer's application guidance and your saw's compatibility before using it on melamine or MDF.

The Diablo D1280X combines an 80-tooth Hi-ATB design with a fine-finish cutting profile, making it suitable for detail-focused work in hardwoods such as oak. Its finish-oriented tooth geometry can help reduce rough edges and the need for additional sanding, although results depend on the material, setup and cutting technique.

The Diablo D1280X is a 12-inch carbide-tipped blade with 80 Hi-ATB teeth, designed for fine-finish woodworking. Its high tooth count and tooth geometry make it a suitable option for clean crosscuts in hardwoods and softwoods when paired with a compatible saw.

Use a sharp, compatible fine-finish blade with a high tooth count and geometry suited to clean crosscuts, such as the 80-tooth Hi-ATB Diablo D1280X. Secure the workpiece, allow the blade to reach operating speed and feed the cut steadily to help achieve a smoother edge.

A fine-finish blade with a high tooth count and Hi-ATB geometry, such as the Diablo D1280X, can help reduce chipping on suitable plywood applications. However, the D1280X is a 12-inch blade, so confirm that your circular saw accepts this diameter before use; use appropriate material support and follow the saw manufacturer's setup guidance.

Choose a blade designed for fine-finish cuts, with tooth geometry that helps produce cleaner edges on compatible sheet materials. The Diablo D1280X has 80 Hi-ATB teeth, but confirm its suitability for your specific melamine panel and saw, and use proper support and a steady cutting technique to help minimise edge damage.

The Diablo D1280X is a 12-inch, 80-tooth carbide-tipped blade with Hi-ATB geometry for fine-finish woodworking. It is designed for clean cuts in hardwoods and softwoods, making it an option for projects where the quality of the cut edge is important.

The Diablo D1280X is a 12-inch, 80-tooth fine-finish blade with Hi-ATB geometry that prioritises clean cutting. Before using it on plywood or MDF, check the blade's stated material applications and confirm that its diameter, arbor and operating requirements match your saw.

An 80-tooth blade, such as the Diablo D1280X, is generally oriented towards smoother, finish-focused cuts, while a 40-tooth blade may be more suitable when faster, more general-purpose cutting is the priority. Neither tooth count is universally better; the right choice depends on the material, the type of cut and the finish you need.

A fine-finish blade such as the Diablo D1280X uses a high tooth count and Hi-ATB geometry to prioritise cleaner cuts in suitable hardwoods, softwoods and detail-focused woodworking applications. A general-purpose blade is designed to balance cutting speed and finish across a broader range of tasks, so it may be more practical when versatility matters more than the smoothest possible edge.

Consider the Diablo D1280X if you need a 12-inch blade with 80 Hi-ATB teeth for fine-finish woodworking. Its carbide-tipped construction and finish-focused design suit clean cutting in hardwoods, softwoods and trim applications when the blade is compatible with your saw.

The Diablo D1280X has a 1-inch arbor and a 0.118-inch kerf. Check both measurements against your saw's requirements before installation to confirm that the blade fits correctly and is suitable for the intended setup.

The specified maximum speed for the Diablo D1280X is 5,000 RPM. Do not exceed this rating, and confirm that your saw's operating speed and blade-mounting requirements are compatible before use.