Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
DeWalt 12-inch 60-tooth circular saw blade for smooth, precise cutting in wood.
DeWalt

DeWalt 12" 60-T Circular Saw Blade

$167.15 - $167.15
$167.15
$167.15 - $167.15
$167.15
Availability:
In Stock
SKU DW3126

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The DeWalt DW3126 12-in 60T cross blade is a construction miter saw blade designed for smooth, accurate crosscuts in wood and wood-based materials. With 60 teeth and an Alternate Top Bevel (ATB) tooth configuration, it supports clean cutting in softwood, hardwood, chipboard and plywood when used with compatible equipment. Its thin-kerf design helps provide fast, smooth cutting action, while the computer-balanced plate helps reduce vibration for improved accuracy and finish quality. The exclusive wedge shoulder design places additional steel behind each cutting tip to support durability and cutting precision. The DeWalt DW3126 saw blade is suitable for workshop, trim and general woodworking applications when the blade and saw are correctly matched.


  • 60-Tooth Crosscutting Design

    The 60-tooth configuration supports smooth crosscuts and a cleaner finish on compatible wood materials.



  • Thin-Kerf Cutting

    The thin kerf supports fast, smooth cutting while removing less material than a wider-kerf blade.



  • Computer-Balanced Plate

    The balanced blade plate helps reduce vibration, supporting accurate cuts and improved finish quality.



  • Wedge Shoulder Construction

    The reinforced shoulder design places more steel behind each tooth tip to support durability and cutting accuracy.



  • Alternate Top Bevel Teeth

    The ATB tooth configuration is suited to crosscutting wood and wood-based sheet materials.



  • Versatile Woodworking Applications

    Suitable for compatible softwood, hardwood, chipboard and plywood cutting tasks with approved miter, table or radial arm saws.



  • 12-Inch Blade Diameter

    The 12-inch diameter helps buyers identify the correct blade size for a compatible saw. Check the saw manufacturer's requirements before installation.



  • 60-Tooth Blade for Fine-Finish Work

    The combination of 60 teeth and an ATB tooth design supports finish-oriented crosscutting on suitable wood materials.



  • 1-Inch Arbor Size

    The 1-inch arbor helps buyers check mounting compatibility. Confirm the arbor requirements and approved blade dimensions in the saw manual before use.



  • Compatibility and Speed Checks

    Before fitting the blade, verify the saw type, blade diameter, arbor size and maximum permitted operating speed against the manufacturer's instructions.





  • Brand:
    DeWalt

  • Model / MPN / SKU:
    DW3126

  • Product Type:
    Construction Miter Saw / Crosscutting Blade

  • Blade Diameter:
    12 inches

  • Number of Teeth:
    60

  • Arbor Size:
    1 inch

  • Diamond Arbor Knockout:
    13/16 inch, as listed by the retailer

  • Tooth Configuration:
    Alternate Top Bevel (ATB)

  • Tooth Material:
    Carbide-tipped, according to technical listings

  • Kerf / Cut Width:
    0.095 inch

  • Plate Thickness:
    0.069 inch

  • Hook Angle:
    0 degrees in the technical listing

  • Maximum RPM:
    Conflicting listings: 4,800 RPM on DeWalt's regional page and 7,000 RPM on retailer specifications

  • Intended Materials:
    Softwood, hardwood, chipboard and plywood

  • Compatible Saw Types:
    Compatible miter, table and radial arm saws

  • Package Contents:
    1 saw blade



Frequently Asked Questions

The DeWalt DW3126 is a 12-inch, 60-tooth carbide-tipped blade designed for fine-finish wood cutting. Its thin-kerf design and computer-balanced plate are intended to support smooth cutting and help reduce vibration.

The DeWalt DW3126 has a 12-inch diameter, 60 teeth and a 1-inch arbor. Check that your miter saw supports these dimensions and that the blade is suitable for the saw's operating speed before installation.

Choose a blade designed for finish cuts in the materials you use, and check its diameter, arbor, tooth count and compatibility with your saw. The DeWalt DW3126 has 60 carbide-tipped teeth and is listed for softwood, hardwood, chipboard and plywood applications.

The DW3126 features a computer-balanced plate designed to help reduce vibration and improve cutting accuracy and finish. Keep the blade clean and in good condition, install it correctly and support the workpiece securely to help achieve consistent results.

The DeWalt DW3126 is listed for softwood, hardwood, chipboard and plywood, making it an option for a variety of wood-cutting tasks. Always check the material and saw compatibility, and remember that the finish also depends on blade condition, setup and cutting technique.

A high tooth count alone cannot guarantee a smooth finish, as a dull or dirty blade, incorrect alignment, unsuitable feed technique or poor workpiece support can affect the cut. Inspect the blade, check the saw alignment according to its manual and secure the material before cutting.

Use a compatible blade in good condition and make sure it is fitted correctly, with the workpiece firmly supported. The DW3126 has a computer-balanced plate designed to help reduce vibration, but saw condition, alignment and setup also influence performance.

Choose a blade intended for plywood and finish-cutting applications, and ensure it is compatible with your saw. The 60-tooth DeWalt DW3126 is listed for plywood and other wood materials; supporting the sheet properly and using the correct cutting technique can also help limit tear-out.

Search for the exact model number DW3126 to find the DeWalt 12-inch, 60-tooth blade with a 1-inch arbor. Check the current PowerBolt & Tool product listing for price, stock status and purchasing details, as these can change.

The DW3126 is described as a fine-finish blade for wood and has 60 carbide-tipped teeth, a thin-kerf design and a computer-balanced plate. These features are intended to support smooth cuts and reduced vibration, although the final finish depends on the material, saw setup and blade condition.

A 60-tooth blade such as the DW3126 is generally suited to finer cuts, while a 32-tooth blade is typically chosen when a faster, more general-purpose cut is preferred. The right choice depends on the material, cut direction, finish required and saw compatibility, so tooth count should not be the only selection factor.

An ATB (Alternate Top Bevel) blade has teeth with alternating bevelled top edges and is commonly used for crosscutting wood and helping produce a cleaner finish. A flat-top grind (FTG) has flat-topped teeth and is often used for efficient ripping, so choose the geometry that suits the material and cutting task.

The DeWalt DW3126 matches these specifications, with a 12-inch diameter, 60 teeth and a 1-inch arbor. Confirm that these dimensions and the blade's speed rating are compatible with your particular saw before use.

DeWalt's product information identifies the DW3126 for softwood, hardwood, chipboard and plywood cutting applications. Use it only with compatible equipment and follow the saw and blade manufacturers' guidance for the material being cut.

DeWalt's official product page image identifies a maximum speed of 4,800 RPM, while some retailer listings state 7,000 RPM. Because the available specifications conflict, confirm the rating printed on the exact blade or obtain confirmation from DeWalt for your regional model before publishing or using a maximum-RPM figure.