Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo circular saw blade with carbide teeth
Diablo

Diablo 7-1/4" x 70-T Steel Demon Carbide-Tipped Saw Blade for Metal

$75.23 - $75.23
$75.23
$75.23 - $75.23
$75.23
Availability:
In Stock
SKU D0770FA

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D0770FA 7-1/4-inch, 70-tooth Steel Demon carbide-tipped saw blade is designed for cutting thin ferrous metals with a compatible circular saw. Its TiCo Hi-Density carbide teeth and Triple Chip Grind (TCG) tooth design support clean, controlled cuts in suitable thin mild steel, including sheet metal, roofing, siding and steel studs. The laser-cut steel blade body and anti-vibration technology are designed to support stability and reduce vibration during cutting. A Perma-SHIELD non-stick coating helps reduce friction and heat build-up. This Diablo Steel Demon circular saw blade is intended for metal-cutting applications within the blade's specified material thickness and speed limits.



  • Designed for Framing and Demolition

    Built for demanding construction and renovation tasks, including suitable framing cuts, remodelling work and demolition applications.




  • Dura-Blend TiCo Carbide Teeth

    The specialised carbide cutting edges are designed to support impact resistance and wear resistance during demanding cutting applications.




  • 24-Tooth Framing Configuration

    The 24-tooth design supports general framing and demolition cuts in compatible wood materials. Confirm the tooth count against the manufacturer's specification for the D0724DA.




  • Designed for Nail-Embedded Wood

    The carbide tooth design is intended for demanding cuts in suitable lumber containing embedded fasteners. Follow the manufacturer's material restrictions and safety guidance.




  • Thin-Kerf Cutting Design

    The thin-kerf design is intended to reduce cutting resistance and support efficient cutting through compatible wood stock. Verify the exact kerf measurement for this model before publishing.




  • Lock-Tooth Technology

    The reinforced carbide tip connection is designed to withstand impact during demanding cutting applications.




  • Perma-SHIELD Non-Stick Coating

    The coating helps resist heat, resin build-up and corrosion, supporting a cleaner blade surface during appropriate use.




  • Anti-Vibration Design

    The blade's stabilising features are intended to help manage vibration and support controlled cutting. Correct blade installation and saw condition also affect vibration.




  • Versatile Renovation Applications

    Suitable applications may include framing lumber, plywood, OSB, subfloor removal and other compatible wood demolition tasks. Check material suitability before cutting.




  • Check Blade Compatibility and Specifications

    Confirm the D0724DA's diameter, arbor size, maximum RPM and pack quantity against the manufacturer's listing. Match the blade to the saw's requirements before installation.





  • Brand:
    Diablo

  • Model / MPN / SKU:
    D0770FA

  • Product Type:
    Steel Demon Carbide-Tipped Metal-Cutting Circular Saw Blade

  • Blade Diameter:
    7-1/4 inches

  • Number of Teeth:
    70

  • Tooth Design:
    Triple Chip Grind (TCG)

  • Arbor Size:
    5/8 inch

  • Kerf:
    0.071 inch

  • Plate Thickness:
    0.051 inch

  • Hook Angle:
    -5 degrees

  • Maximum RPM:
    5,800 RPM

  • Cutting Edge Material:
    TiCo Hi-Density carbide

  • Blade Body Material:
    Steel

  • Coating:
    Perma-SHIELD non-stick coating

  • Vibration Control:
    Anti-vibration technology

  • Suitable Materials:
    Thin ferrous metal and compatible mild steel

  • Typical Applications:
    Suitable thin sheet metal, roofing, siding and steel studs

  • Compatible Tool:
    Compatible 7-1/4-inch circular saw approved for the blade

  • Country of Origin:
    Italy, according to retailer listings


Frequently Asked Questions

The Diablo D0724DA Demo Demon is a 7-1/4-inch, 24-tooth framing and demolition blade designed for nail-embedded wood. Its TiCo carbide construction, Lock-Tooth technology and impact-resistant brazing are designed to help the teeth withstand demanding demolition cuts.

The Diablo D0724DA is designed for framing, remodelling and demolition work involving materials such as 2x lumber, plywood and OSB. Its 24-tooth design and thin kerf make it a versatile option for contractors handling different wood-cutting tasks with a compatible circular saw.

For subfloor demolition, look for a blade designed to withstand demanding cuts and occasional contact with embedded nails. The Diablo D0724DA features TiCo high-density carbide, impact-resistant tooth construction and a thin-kerf design for framing and demolition applications.

A thin kerf removes less material than a wider kerf, which can reduce cutting resistance and make feeding the blade through wood easier in suitable conditions. Diablo states that the D0724DA's cutting design can deliver up to twice as many cuts per charge in cordless saws; actual results depend on the saw, battery, material and cutting conditions.

The Diablo D0724DA Demo Demon is designed for demanding framing and demolition applications, including remodelling, subfloor removal and roof demolition. It can cut supported materials such as 2x lumber, plywood, OSB and nail-embedded wood, as well as asphalt shingles where the application is suitable.

Use a blade specifically designed for nail-embedded wood, such as the Diablo D0724DA Demo Demon. Its carbide teeth and impact-resistant construction are designed for demanding cuts, but inspect the timber where possible, secure the workpiece and follow the saw manufacturer's safety instructions. Wear appropriate eye and hearing protection.

The Diablo D0724DA is designed for demolition tasks that include subfloor removal and cutting nail-embedded wood. Its 24-tooth carbide construction is intended for tough renovation work, but check the cut depth and inspect for hidden pipes, cables and other services before cutting.

The Diablo D0724DA features an anti-vibration design intended to improve stability during cutting. You should also check that the blade is undamaged, correctly fitted and compatible with the saw, and ensure the workpiece is securely supported. Excessive vibration can indicate an installation issue, a damaged blade or a problem with the tool.

The Diablo D0724DA Demo Demon is a 7-1/4-inch, 24-tooth carbide blade designed for framing and demolition work. Its key features include a .059-inch thin kerf, impact-resistant tooth construction and a design intended for nail-embedded wood, subfloors and other demanding renovation tasks.

The Diablo D0724DA Demo Demon is a 24-tooth carbide blade designed for cutting nail-embedded wood in framing and demolition applications. Its TiCo high-density carbide, Lock-Tooth technology and shock-resistant brazing are designed to improve tooth durability when the blade encounters demanding materials.

A standard framing blade is generally intended for routine timber cuts, while a demolition-focused blade is designed to handle tougher renovation conditions, including wood that may contain nails. The Diablo D0724DA combines carbide teeth with impact-resistant construction to suit these more demanding applications, although the correct blade still depends on the material and cutting task.

A thin-kerf blade removes less material during each cut and may reduce cutting resistance, helping the saw feed through wood more easily. Diablo states that the D0724DA's design can deliver up to twice as many cuts per battery charge in cordless saws, but actual results vary with the battery, material and working conditions.

Check the blade diameter, arbor size, maximum RPM, kerf, material compatibility and the saw manufacturer's requirements. The Diablo D0724DA has a 7-1/4-inch diameter, 5/8-inch arbor, .059-inch kerf and maximum rated speed of 8,000 RPM. Confirm that these specifications are compatible with your saw before fitting the blade.

The Diablo D0724DA has a 7-1/4-inch diameter, 24 teeth, a 5/8-inch arbor, a .059-inch kerf and a .040-inch plate thickness. Its hook angle is 15° and its maximum rated speed is 8,000 RPM. Check the manufacturer's current product information and the markings on the blade before installation.

The PowerBolt & Tool listing identifies the Diablo D0724DA as a 10-piece pack. Check the pack quantity and selling unit on the live listing before ordering, as other retailers or manufacturer listings may offer a different package configuration.