Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
DeWalt 12-inch high-performance aluminium oxide circular saw blade for cutting applications.
DeWalt

DeWalt 12" High Performance Aluminum Oxide Circular Saw Blade

$9.74 - $9.74
$9.74
$9.74 - $9.74
$9.74
Availability:
In Stock
SKU DW8022

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The DeWalt DW8022 metal cutting blade is a 12-inch high-performance abrasive cut-off wheel designed for metal-cutting applications with compatible equipment. It features high-performance aluminum oxide grain to support long service life and effective material removal. Its high grain concentration helps deliver aggressive cutting action and smooth-running performance, while two full sheets of thick fibreglass reinforcement provide strength for demanding applications and high-speed operation. The DW8022 is suitable for cutting compatible metal stock, including steel, rebar, pipe and structural metal. Although it may be described as a circular saw blade in some listings, it is an abrasive Type 1 cut-off wheel, not a toothed circular saw blade.


  • High-Performance Aluminium Oxide Grain

    The abrasive grain is designed to provide long service life and effective material removal during metal-cutting work.



  • Aggressive Cutting Action

    A high grain concentration helps the wheel cut compatible metal stock efficiently.



  • Reinforced Wheel Construction

    Two full sheets of thick fibreglass reinforcement provide strength for demanding cutting applications.



  • Smooth-Running Performance

    The wheel's abrasive composition supports smooth operation when installed and used correctly.



  • Designed for High-Speed Operation

    The reinforced construction is designed for high-speed cutting within the wheel's specified RPM limit.



  • Suitable for Metal Fabrication

    The Type 1 cut-off wheel design supports appropriate metal-cutting tasks in workshops and industrial environments.





  • Brand:
    DeWalt

  • Model / MPN / SKU:
    DW8022

  • Product Type:
    High-Performance Metal Cutting Cut-Off Wheel

  • Wheel Diameter:
    12 inches

  • Wheel Thickness:
    1/8 inch

  • Arbor / Centre Hole:
    1 inch

  • Wheel Type:
    Type 1

  • Abrasive Material:
    Aluminum oxide

  • Abrasive Grade:
    A24R

  • Reinforcement:
    Two full sheets of thick fibreglass

  • Maximum Operating Speed:
    6,400 RPM

  • Primary Application:
    Metal cutting

  • Suitable Materials:
    Compatible ferrous metals, including steel

  • Package Contents:
    1 wheel, according to DeWalt's official listing

  • Compatibility:
    Use only with a machine approved for the wheel dimensions, arbor and rated speed



Frequently Asked Questions

The DeWalt DW8022 is a 12-inch Type 1 aluminium oxide abrasive cut-off wheel with a 1-inch arbor. It is designed for high-speed metal cutting, so check your saw's manual to confirm that the wheel diameter, arbor size and wheel type are compatible before use.

The DeWalt DW8022 has a thickness of 1/8 inch and a maximum operating speed of 6,400 RPM. It also has a 12-inch diameter and a 1-inch arbor, and it must not be operated above its rated speed.

Yes, the DeWalt DW8022 uses high-performance aluminium oxide abrasive and is designed for cutting carbon steel and stainless steel. Listed applications include rebar, steel pipe, sheet metal and structural steel, although suitability depends on the workpiece and cutting setup.

The DeWalt DW8022 is a 12-inch Type 1 abrasive cut-off wheel with A24R abrasive grade and two full sheets of fibreglass reinforcement. Its high grain concentration is designed to support aggressive cutting and smoother running, while the reinforcement is intended to provide strength for demanding applications.

The DeWalt DW8022 measures 12 inches in diameter and 1/8 inch thick, with a 1-inch arbor. Confirm all three dimensions against your saw's requirements, and check the wheel's Type 1 classification and maximum 6,400 RPM rating before fitting it.

Choose a wheel specifically rated for the metal you intend to cut, and check its diameter, thickness, arbor size, wheel type and maximum operating speed. The DeWalt DW8022 is an aluminium oxide cut-off wheel designed for carbon steel and stainless steel, including rebar, steel pipe, sheet metal and structural steel.

Check that your saw accepts a 12-inch Type 1 abrasive cut-off wheel with a 1-inch arbor, and confirm that the wheel is suitable for the material you plan to cut. The DeWalt DW8022 is rated for a maximum of 6,400 RPM, so compare this with the tool's instructions and never exceed the wheel's marked speed limit.

A cut-off wheel must be suitable for the tool's operating speed because exceeding its maximum rating can cause the wheel to fail and create a serious injury risk. The DeWalt DW8022 is rated for a maximum of 6,400 RPM, so follow the saw and wheel manufacturers' instructions and do not use it above this limit.

Look for the DeWalt DW8022, a 12-inch Type 1 aluminium oxide metal cut-off wheel with a 1-inch arbor and 1/8-inch thickness. Check the live PowerBolt & Tools listing for the current price, availability and selling quantity before ordering.

The DeWalt DW8022 is designed for metal cutting in carbon steel and stainless steel, including applications involving rebar, steel pipe, sheet metal and structural steel. Its aluminium oxide abrasive and reinforced construction are intended for demanding cutting work, but always confirm that the wheel and saw are suitable for the specific job.

A Type 1 abrasive cut-off wheel removes material through abrasive action, while a toothed circular saw blade cuts using individual teeth. The DeWalt DW8022 is an abrasive aluminium oxide wheel, not a toothed blade, so it must be used with a compatible saw designed for this wheel type.

Check the wheel type, diameter, thickness, arbor size, material suitability and maximum rated RPM, then confirm that these specifications match your tool. The DeWalt DW8022 is a Type 1 wheel measuring 12 inches by 1/8 inch, with a 1-inch arbor, A24R aluminium oxide abrasive and a maximum speed of 6,400 RPM.

The DeWalt DW8022 uses high-performance aluminium oxide abrasive with a high grain concentration designed for aggressive cutting and smoother running. It also has two full sheets of fibreglass reinforcement intended to provide strength for demanding applications and high-speed operation within the wheel's rated limits.

The DeWalt DW8022 has an A24R abrasive grade and a maximum operating speed of 6,400 RPM. Check the specifications marked on the wheel and follow the tool manufacturer's instructions before use.

The selling quantity depends on the retailer's listing: some listings offer one DW8022 wheel, while others specify a 10-wheel box. Check the live PowerBolt & Tools product page to confirm the actual quantity supplied and whether the displayed price applies to one wheel or a full pack.