Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 10-inch 40-tooth wood cutting saw blade
Diablo

Diablo 10" x 40-Teeth General Purpose Saw Blade for Wood

$72.20 - $72.20
$72.20
$72.20 - $72.20
$72.20
Availability:
In Stock
SKU D1040X

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D1040X 10" x 40 general purpose saw blade is designed for ripping and crosscutting a variety of wood materials. Its 40-tooth Alternate Top Bevel (ATB) carbide cutting design supports smooth, clean cuts in hardwood, softwood, plywood and other compatible wood products. The blade features TiCo Hi-Density carbide, a Perma-SHIELD non-stick coating and a thin laser-cut kerf to help reduce friction and support efficient cutting. It is suitable for compatible 10-inch table saws and mitre saws when the arbor, speed rating and manufacturer instructions match.



  • General-Purpose Wood-Cutting Performance

    Designed for common woodworking applications, including ripping and crosscutting compatible wood materials, helping reduce the need to change blades between tasks.




  • 44-Tooth ATB Design

    The Alternate Top Bevel tooth geometry supports general-purpose ripping and crosscutting in suitable wood and plywood. Verify the tooth count against the manufacturer's specification before publishing.




  • TiCo Hi-Density Carbide Teeth

    The application-specific carbide teeth are designed to support cutting performance and wear resistance across common woodworking applications.




  • Versatile Ripping and Crosscutting

    The general-purpose configuration is intended for both rip cuts along the grain and crosscuts across the grain, offering flexibility for everyday woodworking projects.




  • Thin 0.098-Inch Kerf

    The 0.098-inch kerf supports efficient cutting through compatible wood stock. Actual cutting performance depends on the material, saw setup and blade condition.




  • Perma-SHIELD Non-Stick Coating

    The protective coating helps resist heat, resin build-up and corrosion, supporting a cleaner blade surface during woodworking use.




  • Tri-Metal Shock-Resistant Brazing

    The brazing construction helps secure the carbide tips and withstand cutting impacts during suitable applications.




  • Hardened Steel Blade Body

    The hardened steel body is designed to maintain blade stability and support durability when the blade is installed and used correctly.




  • Suitable for Common Wood Materials

    Designed for compatible woodworking materials such as hardwood, softwood and plywood. Confirm suitability for oak, pine, OSB and pressure-treated lumber against the manufacturer's application guidance.




  • Check Arbor Fit and Maximum RPM

    The supplied product information identifies a 1-inch arbor and a 5,000 RPM maximum, but the RPM specification has been flagged as potentially conflicting across listings. Confirm both specifications and ensure the blade is compatible with the saw before use.






  • Brand:
    Diablo

  • Model / MPN / SKU:
    D1040X

  • Product Type:
    General Purpose Circular Saw Blade

  • Blade Diameter:
    10 inches

  • Number of Teeth:
    40

  • Tooth Grind:
    ATB (Alternate Top Bevel)

  • Arbor Size:
    5/8 inch

  • Kerf:
    0.098 inch

  • Plate Thickness:
    0.071 inch

  • Hook Angle:
    15 degrees

  • Maximum RPM:
    7,000 RPM - verify the blade marking and saw manual before use

  • Cutting Edge Material:
    Carbide

  • Suitable Materials:
    Wood, hardwood, softwood and plywood

  • Compatible Saw Types:
    Compatible table saws and mitre saws

  • Primary Applications:
    General-purpose ripping and crosscutting

  • Coating:
    Perma-SHIELD non-stick coating


Frequently Asked Questions

The Diablo D1244X is a 12-inch, 44-tooth general-purpose saw blade designed for a variety of woodworking tasks. It can cut materials such as plywood, OSB, oak, pine and other solid woods, making it a practical option for projects that involve different wood types.

The Diablo D1244X combines a 44-tooth ATB (Alternate Top Bevel) tooth design with general-purpose versatility for ripping and crosscutting wood. It offers a balance for everyday woodworking when you want to handle both cuts without routinely switching between dedicated blades.

The Diablo D1244X is intended for general woodworking applications involving materials such as oak, pine and pressure-treated lumber. Its 12-inch diameter and 44 ATB teeth make it suitable for a range of common construction and woodworking cuts, provided the material and blade are appropriate for the saw being used.

Check the blade's material compatibility, tooth geometry, kerf width and carbide construction. The Diablo D1244X has 44 ATB teeth, a .098-inch kerf and carbide teeth, supporting general-purpose cutting across plywood, OSB and solid wood.

A coated blade can help resist material build-up, heat and corrosion, depending on its coating and cutting conditions. The Diablo D1244X features Perma-SHIELD coating, which is designed to help reduce friction and protect the blade during use; keep the blade clean and follow the manufacturer's care guidance for best results.

The Diablo D1244X uses 44 ATB teeth, a geometry commonly used for crosscutting wood and helping produce clean cuts. For better results in plywood, use a sharp blade, support the workpiece securely, set up the saw correctly and feed the material at a controlled rate. Test the setup on a scrap piece first, as the finish also depends on the plywood and saw condition.

The Diablo D1244X is a general-purpose blade intended for both ripping and crosscutting, including everyday solid-wood projects. For a cleaner rip, use a sharp blade and a suitable feed rate, and keep the workpiece properly supported. A dedicated ripping blade may be preferable when ripping speed or performance on repeated long rip cuts is the main priority.

Look for a general-purpose blade that balances tooth geometry and material compatibility across both cutting operations. The Diablo D1244X has a 44-tooth ATB design and is intended for materials including plywood, OSB, oak, pine and other solid wood, making it an option for varied woodworking tasks.

The Diablo D1244X is a 12-inch general-purpose blade designed for ripping and crosscutting wood. Its 44 ATB teeth support a balance of cutting applications, so it can be useful for everyday woodworking where changing between dedicated rip and crosscut blades is not practical.

The Diablo D1244X is a 12-inch saw blade with 44 ATB teeth, designed for general-purpose woodworking. It is suitable for materials including plywood, OSB, oak, pine and other solid woods, provided its specifications match the saw and the intended cutting application.

A general-purpose blade is designed to handle both ripping along the grain and crosscutting across it, offering versatility for mixed woodworking tasks. A dedicated ripping blade is optimised for cutting along the grain and may be preferable for frequent or demanding rip cuts, while a general-purpose option such as the Diablo D1244X reduces the need to change blades between common operations.

Kerf is the width of material removed by the blade as it cuts. The Diablo D1244X has a .098-inch kerf, which is its specified cutting width; a narrower kerf can remove less material and may reduce cutting resistance, but the actual effect depends on the saw, blade design and workpiece. Check that the blade is suitable for your saw before use.

The Diablo D1244X is intended for use with compatible table saws and mitre saws. Before fitting it, check that your saw accepts a 12-inch blade with a 1-inch arbor, and ensure the blade's maximum rated RPM meets or exceeds the saw's operating speed requirements as specified by the manufacturers.

The Diablo D1244X has a 12-inch diameter, 44 ATB teeth, a 1-inch arbor, a .098-inch kerf, a .071-inch plate thickness and a 15-degree hook angle. The supplied product specifications list a maximum speed of 5,000 RPM. Always confirm the markings on the blade and the requirements of your saw before installation.

The Diablo D1244X is designed for general-purpose woodworking with materials including oak, pine, other hardwoods and softwoods, plywood, OSB, pressure-treated lumber and beams. Confirm that the specific material and cutting task are suitable for the blade, and use it only with a compatible saw.