Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
Diablo 36T circular saw blade for woodworking
Diablo

Diablo 7-1/4" x 36-Teeth Carbide Saw Blade for Wood and Metal

$47.11 - $47.11
$47.11
$47.11 - $47.11
$47.11
Availability:
In Stock
SKU D0736GPA

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D0736GPA 7-1/4-inch 36-tooth carbide saw blade is designed for cutting compatible wood and specified metal materials with a suitable circular saw. It features high-density TiCo carbide teeth and a Chamfered Alternate Top Bevel (C-ATB) tooth design to support cutting wood, including wood containing nails, and selected metal stock. The Perma-SHIELD non-stick coating helps protect against heat, gumming and corrosion, while laser-cut stabilizer vents help manage noise and vibration. With a 5° hook angle and thin kerf design, the Diablo D0736GPA saw blade is suited to selected construction, carpentry, fabrication and renovation tasks.


  • TiCo High-Density Carbide Teeth

    The specially formulated TiCo carbide teeth are designed to resist impact and wear during compatible wood and metal cutting applications.



  • 36-Tooth C-ATB Design

    The 36-tooth Chamfered Alternate Top Bevel design supports cutting clean wood and wood containing nails, as well as selected metal materials within the manufacturer's specifications.



  • Perma-SHIELD Non-Stick Coating

    The non-stick aluminium coating helps protect the blade against heat, gumming and corrosion during cutting operations.



  • Thin Kerf Cutting Design

    The 0.067-inch kerf is designed to reduce cutting resistance and heat build-up, helping support efficient cutting in compatible materials.



  • Tri-Metal Shock-Resistant Brazing

    The brazing construction helps secure the carbide tips and withstand impact during demanding cutting applications.



  • Laser-Cut Stabilizer Vents

    The stabilizer vents help manage noise and vibration during cutting, supporting controlled blade operation in compatible applications.



  • Laser-Cut Arbor

    The laser-cut arbor is designed to support stable blade rotation when fitted to a compatible circular saw. Check the arbor fit and tool requirements before installation.



  • Designed for Wood and Nail-Embedded Lumber

    The carbide teeth and C-ATB configuration support cutting clean wood and wood containing nails, making the blade suitable for selected construction and remodelling tasks.



  • Suitable for Selected Metal-Cutting Applications

    The blade is designed to cut specified metal materials, including steel studs and other compatible metal stock, within the manufacturer's stated cutting-capacity limits.



  • Compatible with Suitable Corded and Cordless Circular Saws

    The blade is designed for use with compatible 7-1/4-inch circular saws. Confirm the arbor size, maximum RPM and material-cutting capacity before fitting or operating the blade.



  • Brand:
    Diablo

  • Model / MPN / SKU:
    D0736GPA

  • Product Type:
    Carbide Circular Saw Blade

  • Blade Diameter:
    7-1/4 inches

  • Number of Teeth:
    36 C-ATB

  • Tooth Design:
    Chamfered Alternate Top Bevel

  • Cutting Edge Material:
    TiCo high-density carbide

  • Arbor Size:
    5/8 inch

  • Kerf:
    .067 inch

  • Plate Thickness:
    .051 inch

  • Hook Angle:
    5°

  • Maximum Speed:
    8,000 RPM

  • Maximum Wood Cutting Thickness:
    Up to 2-1/4 inches in specified clean wood and wood containing nails

  • Metal Cutting Capacity:
    Specified metal wall thicknesses from 3/32 to 1/4 inch

  • Threaded Rod Capacity:
    1/4 to 1 inch diameter, within manufacturer specifications

  • Coating:
    Perma-SHIELD non-stick aluminium coating

  • Stabilisation:
    Laser-cut stabilizer vents

  • Tool Compatibility:
    Compatible circular saws meeting blade and arbor requirements

  • Primary Applications:
    Wood and specified metal cutting


Frequently Asked Questions

The Diablo D0736GPA is a 7-1/4-inch multi-material circular saw blade designed for cutting clean wood, nail-embedded wood and specified metal materials. Its 36 C-ATB teeth and TiCo Hi-Density carbide construction support applications such as 2X lumber, steel studs, angle iron and channel, within the blade's stated cutting capacities.

Yes, the Diablo D0736GPA is designed to handle all three applications without changing to a different blade for each material. It can cut clean wood and nail-embedded wood up to 2-1/4 inches thick, as well as specified metal stock with wall thicknesses from 3/32 to 1/4 inch and threaded rod from 1/4 to 1 inch in diameter.

The Diablo D0736GPA is designed for multi-material cutting across wood and specified metal applications. It can cut 2X lumber and wood with nails up to 2-1/4 inches thick, along with angle iron and steel tubing with wall thicknesses from 3/32 to 1/4 inch. Check the metal section's dimensions and your saw's compatibility before cutting.

The Diablo D0736GPA is designed to cut clean wood, nail-embedded wood, steel channel and threaded rod with the same blade. Its stated capacity includes wood up to 2-1/4 inches thick, metal with 3/32 to 1/4-inch wall thickness and threaded rod measuring 1/4 to 1 inch in diameter.

The Diablo D0736GPA matches these requirements with a 7-1/4-inch diameter, 5/8-inch arbor and a stated metal cutting capacity of 3/32 to 1/4-inch wall thickness. Its 36 C-ATB teeth and TiCo Hi-Density carbide are designed for cutting specified metal materials, including steel studs, channel, angle iron, pipe, tubing, plate and bar stock.

Use a blade specifically designed to handle both clean wood and wood containing nails. The Diablo D0736GPA uses impact-resistant TiCo Hi-Density carbide tips and a C-ATB tooth design to support cutting nail-embedded wood up to 2-1/4 inches thick. Always check the material for hidden obstructions and follow the saw and blade manufacturers' safety instructions.

The Diablo D0736GPA is a multi-material blade designed for cutting both wood and specified metal materials, including steel studs. It can cut clean and nail-embedded wood up to 2-1/4 inches thick, as well as steel studs with wall thicknesses between 3/32 and 1/4 inch, provided the saw is approved for the application.

The Diablo D0736GPA is designed for cutting steel channel, angle iron and threaded rod, alongside other specified metal materials. Its stated capacity covers metal wall thicknesses from 3/32 to 1/4 inch and threaded rod from 1/4 to 1 inch in diameter. Check the dimensions and material type before cutting.

The Diablo D0736GPA is a 7-1/4-inch, 36-tooth multi-material blade designed for clean wood, nail-embedded wood and specified metal applications. It has a 5/8-inch arbor and uses TiCo Hi-Density carbide with C-ATB tooth geometry to support cutting 2X lumber, steel studs, angle iron, channel and threaded rod within its stated limits. Confirm that your circular saw is suitable for the intended metal-cutting application before fitting the blade.

The Diablo D0736GPA is designed to support different construction and remodelling tasks with one blade, including cutting clean wood, nail-embedded framing timber and specified metal stock. Its applications include 2X lumber, OSB, steel studs, angle iron, channel, flat bar and threaded rod, subject to the stated material capacities and saw compatibility.

Check the blade diameter, arbor size, kerf, plate thickness, maximum RPM and the materials and thicknesses it is designed to cut. For the Diablo D0736GPA, these specifications are a 7-1/4-inch diameter, 5/8-inch arbor, 0.067-inch kerf, 0.051-inch plate thickness and 8,000 RPM maximum speed. Also confirm that your saw is approved for the blade and the intended wood or metal application.

A conventional framing blade is generally intended for fast wood cutting, while the Diablo D0736GPA's 36 C-ATB tooth design is specifically developed to handle clean wood, nail-embedded wood and certain metal materials. Its TiCo Hi-Density carbide tips and shock-resistant brazing are designed to withstand the impact associated with nail-embedded wood. It is a multi-material option rather than a direct replacement for every framing blade or application.

The Diablo D0736GPA is designed for cutting clean wood, nail-embedded wood and specified steel materials, including steel studs, channel, angle iron, pipe, tubing, plate and bar stock. Its stated capacity is up to 2-1/4 inches in wood and 3/32 to 1/4-inch wall thickness in metal. Although it is listed for corded and cordless circular saws, check your specific saw's instructions

The Diablo D0736GPA can cut clean wood and nail-embedded wood up to 2-1/4 inches thick. Its stated metal capacity is 3/32 to 1/4-inch wall thickness for materials such as steel studs, channel, angle iron, pipe, tubing, plate and bar stock. It can also cut threaded rod from 1/4 to 1 inch in diameter.