Skip to content

HOTLINE - 1-888-514-5151

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th

100% secure payment

Get 10% off your first order - 🎉Use NEWTOPBT | September 30th
uw67sp3gbvkrgywtan16.png
Diablo

Diablo 6-1/2" x 24-Teeth Framing Saw Blade for Wood

$20.81 - $20.81
$20.81
$20.81 - $20.81
$20.81
Availability:
In Stock
SKU D0624A

100% Satisfaction Guaranteed

We'll exchange or refund any product that doesn't meet your expectations.

Uncover the full potential of this product

The Diablo D0624A saw blade is a 6-1/2-inch, 24-tooth circular saw blade designed for fast and efficient wood-framing applications. It features high-performance TiCo™ Hi-Density carbide and Chamfer Alternate Top Bevel (CATB) tooth geometry to support cutting life, impact resistance and tracking control. Its super-thin 0.059-inch kerf helps reduce cutting resistance and improve efficiency with compatible corded and cordless circular saws. The Perma-SHIELD® non-stick coating helps protect the blade against heat, material build-up and corrosion. Suitable for hardwoods, softwoods, 2X lumber, pressure-treated wood, plywood and OSB, the D0624A 6-1/2-inch framing circular saw blade is designed for contractors, carpenters and remodelling professionals.


  • Designed for Wood Framing

    The 6-1/2-inch D0624A is designed for framing applications, with a 24-tooth configuration suited to fast cutting through common wood framing materials.




  • TiCo™ Hi-Density Carbide

    The application-specific carbide blend is designed to provide cutting performance and extended blade life during demanding wood-framing work.




  • 24-Tooth Framing Design

    The 24-tooth configuration supports fast cutting through common framing materials, including dimensional lumber and compatible wood composites.




  • Chamfer Alternate Top Bevel Tooth Geometry

    The CATB tooth design helps support tracking control and more controlled cutting through suitable wood materials.




  • Super-Thin 0.059-Inch Kerf

    The 0.059-inch kerf removes less material during each cut, helping reduce cutting resistance and support efficient cutting with compatible saws.




  • Impact-Resistant Carbide Teeth

    The carbide tooth design is engineered for demanding framing conditions, including suitable nail-embedded wood. Inspect materials carefully and follow safe cutting practices.




  • Increased Carbide Surface Area

    The increased carbide surface area supports durability in demanding framing applications and helps the blade handle challenging wood-cutting conditions.




  • Perma-SHIELD® Non-Stick Coating

    The protective coating helps reduce heat build-up, gumming and corrosion to support consistent blade performance during cutting.




  • Suitable for Common Wood Materials

    The blade is positioned for applications involving framing lumber, pressure-treated wood, plywood and other compatible hardwood and softwood materials.




  • Check Saw Compatibility Before Installation

    Before fitting the blade, check the 6-1/2-inch diameter, 5/8-inch arbor, kerf, maximum RPM and the circular saw manufacturer's compatibility requirements.




  • Brand:
    Diablo

  • Model / MPN / SKU:
    D0624A

  • Product Type:
    Framing Circular Saw Blade

  • Blade Diameter:
    6-1/2 inches

  • Number of Teeth:
    24

  • Tooth Configuration:
    Chamfer Alternate Top Bevel (CATB)

  • Arbor Size:
    5/8 inch

  • Kerf:
    0.059 inch

  • Plate Thickness:
    0.039 inch

  • Hook Angle:
    18 degrees

  • Cutting Edge Material:
    TiCo™ Hi-Density carbide

  • Coating:
    Perma-SHIELD® non-stick coating

  • Maximum Rated Speed:
    Retailer listings differ; verify the blade's marked RPM before use

  • Compatible Saw Type:
    Compatible circular and trim saws

  • Suitable Materials:
    Hardwood, softwood, 2X lumber, pressure-treated wood, plywood and OSB

  • Primary Applications:
    Framing, remodelling, decking, siding and general wood cutting

  • Package Quantity:
    Confirm on the product listing before ordering


Frequently Asked Questions

The Diablo D0624A is a 6-1/2-inch, 24-tooth circular saw blade designed for framing applications and compatible cordless circular saw use. Its 0.059-inch thin kerf is designed to reduce cutting resistance, making it well suited to efficient cutting through framing lumber.

The D0624A uses a 0.059-inch kerf, which removes less material with each cut and is designed to support easier blade feed. This can help a cordless saw cut efficiently, with the overall result depending on the saw, battery, material and cutting conditions.

The Diablo D0624A is a 6-1/2-inch, 24-tooth blade intended for wood framing applications, including 2x lumber, pressure-treated wood and plywood. Its 24-tooth configuration is suited to fast, practical framing cuts rather than applications where a very fine finished edge is the main priority.

The D0624A is built with TiCo carbide and increased carbide surface area to support durability in demanding framing applications. Its impact-resistant design is intended to help when occasional nails are encountered in wood, but the blade should not be treated as a general-purpose metal-cutting blade.

Check the blade diameter, arbor size, tooth count, kerf and maximum RPM against your circular saw's requirements. The Diablo D0624A measures 6-1/2 inches, has 24 teeth, a 5/8-inch arbor, a 0.059-inch kerf and a listed maximum speed of 8,800 RPM.

A thin-kerf blade can help reduce the amount of material removed and the cutting resistance placed on a cordless saw. The D0624A is designed around a 0.059-inch kerf and Diablo states a qualified battery-efficiency benefit, with the actual number of cuts per charge varying according to the saw, battery, material and working conditions.

Cutting resistance can increase when a blade removes more material than necessary or when the blade is not well matched to the application. The D0624A's super-thin 0.059-inch kerf is designed to reduce material removal and support easier feeding through compatible framing lumber.

Blade wandering can be affected by tooth geometry, vibration, incorrect installation, poor workpiece support or the condition of the saw. The D0624A uses ATB tooth geometry for tracking control and an anti-vibration design, while correct arbor fit, blade installation and secure workpiece support are also important for controlled cuts.

The Diablo D0624A is a 6-1/2-inch, 24-tooth circular saw blade positioned for wood framing applications. Its thin-kerf construction and cordless-saw optimisation make it a suitable option when you want efficient cuts through common framing materials.

The Diablo D0624A is a 24-tooth, 6-1/2-inch framing blade designed for use with cordless circular saws. Its 0.059-inch kerf is intended to reduce cutting resistance and support efficient cutting, particularly where battery-powered tools are being used for repeated framing cuts.

A 24-tooth blade is generally suited to faster, more aggressive framing cuts, while higher-tooth-count blades are typically chosen when a smoother finish is more important. The D0624A is aimed at practical wood framing work, so its 24-tooth configuration prioritises efficient cutting rather than fine-finish results.

A thin kerf removes less material per cut, which can reduce cutting resistance and make the blade easier to feed through wood. The D0624A's 0.059-inch kerf is designed around these efficiency benefits, although the actual performance will depend on the saw, battery, material and cutting technique.

The product to look for is the Diablo D0624A, a 6-1/2-inch, 24-tooth framing blade with a 5/8-inch arbor. Check the current PowerBolt & Tools product listing for its latest price, availability and ordering information, as these details can change.

The Diablo D0624A has a 0.059-inch kerf and a listed maximum speed of 8,800 RPM. Before fitting the blade, check that these specifications are compatible with your circular saw and always operate within the applicable blade and tool manufacturer's limits.

The Diablo D0624A is intended for wood applications, including 2x lumber, pressure-treated wood, plywood, hardwoods and softwoods. It is positioned as a framing blade, so choose a blade specifically rated for the material when your application involves metals or other materials outside its intended wood use.